Описание
05081872 GASKET.STEM.HYD.CYLINDER、SLIV Head Waterjet
| Пункт | Номер продукта. | Наименование продукта | Картина |
| 1 | 05144647 | Цилиндр высокого давления |  |
| 2 | 05144688 | Узел уплотнительной головки |  |
| 3 | 05144696 | Прокладка уплотнительной головки |  |
| 4 | 05144712 | Гильза цилиндра |  |
| 5 | 05149703 | Сборка уплотнения |  |
| 6 | 05130091 | Гидравлический картридж |  |
| 7 | 05119151 | Керамический плунжер |  |
| 8 | 05116561 | Тарельчатый тарельник HP |  |
| 9 | 05116751 | Тарельчатая булавка |  |
| 10 | 05144670 | Фиксатор тарельчатого тарельника |  |
Знания для Станок гидроабразивной резки и Запасные части для гидроабразивной резки.
Regarding the Z-axis height of water jet cutting machine from Беспроигрышная головка гидроабразивная резка:
The Z-axis height of a water jet cutting machine from Беспроигрышная головка гидроабразивная резка usually refers to the height of the cutting head of the machine relative to the table surface, which can also be understood as the distance of the nozzle from the table surface.The Z-axis height has a great influence on the quality and efficiency of the cut, because the distance of the nozzle from the table surface affects the cutting angle, the quality of the cut, and the cutting speed of the water jet cutting.
The Z-axis height of a water jet cutting machine from Беспроигрышная головка гидроабразивная резка usually needs to be adjusted for different cutting materials and cutting thicknesses. For thinner materials, the Z-axis height can be set lower to reduce the cutting time and increase the cutting speed; for thicker materials, the Z-axis height needs to be set higher accordingly to ensure the cutting angle and the quality of the cut.
Generally speaking, the Z-axis height of the water jet cutting machine from Беспроигрышная головка гидроабразивная резка can be adjusted by the control system, and the Z-axis height can be customized according to the thickness of the material cut by the customer. Before carrying out the cutting, the operator needs to adjust it according to the actual situation to ensure the cutting quality and efficiency. It should be noted that when adjusting the Z-axis height, attention should be paid to the safety and stability of the robot to avoid the occurrence of machine failure or accident due to improper height setting.
Если вас интересует любая гидроабразивная продукция от Win-Win Поставщик гидроабразивной резки, Свяжитесь со мной, пожалуйста.
The below is our waterjet cutting machine:
