Описание

Waterjet pump parts 10188233 backup ring brass

Installation position: used on the waterjet relief valve, it’s kind of waterjet pump parts

1.Water jet unloading valve backup ring is an important part of the water jet unloading valve, its function is to support the sealing ring inside the unloading valve to prevent the sealing ring from being deformed or damaged by the impact of high pressure water

2.The maintenance operation of the backup ring of the water jet unloading valve mainly includes the following steps

1:Turn off the waterjet intensifier pump, disconnect the power supply, and release the high-pressure water and air pressure. It’s the first step that waterjet users need to do when maintain the waterjet pump parts

2. Remove the pneumatic valve control assembly;

3. Remove the water switch valve body, remove the cylinder and maintenance components; Take out the water switch valve needle, guide ring, sealing ring, backup ring and other parts;

4. Check whether the backup ring is worn, deformed, aged, etc., and if so, replace it in time;

5. Clean the backup ring, apply lubricating oil, and reassemble in the original order;

6. Install the unloading valve assembly of the waterjet intensifier pump parts, restore the power, start the waterjet pump, and check for water or air leakage