Описание
Waterjet manufacturing spare parts for waterjet cutting head and also the waterjet intensifier pump.
The 20435636 valve stem, both suitable for cutting head and intensifier pump’s pneumatic control valve.
Used on the pump is normally open control valve
Used on the cutting head is normally closed control valve
The following info is some little tips for using the waterjet cutting machine:
Do you know how to use the waterjet cutting machine in a right way?
Normally, the waterjet manufacturing will train customers how to use the machine.
1. Before starting, check whether water pressure, water temperature, oil temperature, oil pressure and other parameters are normal, whether there is enough abrasive in the abrasive tank, and whether there is enough lubricating oil in the waterjet intensifer pump.
2. Before cutting, the appropriate nozzle, abrasive and cutting parameters should be selected. According to the thickness, hardness and shape of the cutting material, the distance and Angle between the nozzle and the workpiece should be adjusted, and the cutting path and speed should be set.
3. During the cutting process, the cutting quality and efficiency should be closely observed, and the cutting parameters should be adjusted in time or the cutting should be stopped to avoid waste or damage. At the same time, attention should be paid to safety protection, to avoid being hurt by high pressure water jet or splashing abrasive.
4. After cutting, the waterjet intensifier pump and power supply should be turned off, the residue on the cutting table and the workpiece should be cleaned, the nozzle and the pipeline should be checked for wear or blockage, and replaced or cleaned in time.
5. Regular maintenance of waterjet intensifier pump and system, keep in good working condition
6. Before purchasing, be sure to find several waterjet manufacturing suppliers to understand the situation before purchasing
