Описание
Water only cutting head assembly of the waterjet head
There are also abrasive waterjet head assembly for your reference with the same brand:
FAQ of the waterjet cutting machine – Why is waterjet head often blocked by abrasive? Why does the waterjet mixing tube cause congestion?
When many customers use the equipment, there will be a situation that the waterjet nozzle is blocked. The blockage of the waterjet cutting nozzle will cause the failure of the cutting workpiece, the equipment cannot work, and the serious damage will cause the surface of the material and cause material waste. It is an important reason for the increase of material waste rate, so how to solve the problem of waterjet cutting nozzle congestion? There are the following reasons for your reference:
First, we need to check the quality of the abrasive. Good-quality abrasive should be pure, free of impurities, uniform in particle size, with edges and corners, and the color is reddish brown. If there are impurities in the abrasive, it will cause waterjet cutting nozzle jam
Then check whether there are impurities inside the waterjet cutting nozzle. Many times, water jet cutting operators will accidentally drop impurities inside the abrasive tank when adding the abrasive garnets, such as plastic bags, such as external soil, etc., which will cause the waterejt cutting nozzle blockage, so We need to open the impurity cleaning door at the bottom of the abrasive supply tank to clean up the impurities inside, so that the waterjet cutting nozzle of waterjet head will not be blocked
Check the amount of abrasive again. If the amount of abrasive is too large, the waterjet cutting nozzle will be blocked, so checking the amount of abrasive is also a reason. The normal amount of abrasive is 15-18kg/H. If the amount of abrasive is too large, it may cause two Or multiple abrasive particles are crowded in the middle of the waterjet cutting nozzle at the same time, causing the waterjet cutting nozzle of waterjet head to be blocked