Описание

Waterjet cutting nozzle with 0.76mm inner diameter

Следующие размеры приведены для справки, мы также принимаем индивидуальное производство сопел для гидроабразивной резки по индивидуальному заказу, просто сообщите нам размер, который вам нужен:

7.14×0.76×76.2mm

6.35×0.76×76.2mm

6.0×0.76×76.2mm

7.14×0.76×101.6mm

7.62×0.76×101.6mm

7.62×0.76×76.2mm

8.89×0.76×101.6mm

7.25×0.76×76.2mm

7.49×0.76×76.2mm

8×0.76×101.6mm

9.45×0.76×76.2mm

9.42×0.76×76.2mm

Часто задаваемые вопросы о насадке для гидроабразивной резки:

The aperture size of the waterjet nozzle is selected according to the cutting material, mainly considering the cutting pressure, speed and precision. Generally speaking, the smaller the aperture of the nozzle tube, the higher the cutting pressure, which can cut harder and thicker materials, but the cutting speed will decrease and the incision will become narrower; the larger the aperture of the nozzle tube, the lower the cutting pressure, which can improve cutting speed, but the kerf will also be wider and the accuracy will be reduced by.

Therefore, to choose the appropriate hole diameter of the nozzle tube, it is necessary to test and adjust according to different materials and thicknesses to achieve the best cutting effect. Generally speaking, the incision of pure water cutting is about 0.3mm to 0.5mm, and the incision of abrasive cutting is about 1mm to 1.8mm. The specific nozzle pipe aperture range is as follows: