Описание
10075000 O-RING,3-3/4″x4″x1/8″ Water Jet Supplier
| Пункт | Номер продукта. | Наименование продукта | Картина |
| 1 | 05144647 | Цилиндр высокого давления |  |
| 2 | 05144688 | Узел уплотнительной головки |  |
| 3 | 05144696 | Прокладка уплотнительной головки |  |
| 4 | 05144712 | Гильза цилиндра |  |
| 5 | 05149703 | Сборка уплотнения |  |
| 6 | 05130091 | Гидравлический картридж |  |
| 7 | 05119151 | Керамический плунжер |  |
| 8 | 05116561 | Тарельчатый тарельник HP |  |
| 9 | 05116751 | Тарельчатая булавка |  |
| 10 | 05144670 | Фиксатор тарельчатого тарельника |  |
Знания для Станок гидроабразивной резки и Запасные части для гидроабразивной резки.
What if a water jet cutting machine does not have a bleed-down valve from Water Jet Supplier?
If a water jet cutting machine from Water Jet Supplier does not have a bleed-down valve, the water pressure in the high-pressure water jet system from Water Jet Supplier will continue to exist when cutting is stopped, posing a safety hazard and risk of equipment damage.
In the absence of a bleed-down valve, the water pressure in the high-pressure water jet system from Water Jet Supplier needs to be released by other means when cutting is stopped. Usually the following ways can be used:
Manual water release: After stopping cutting, the water pressure needs to be released by manually opening the water release valve or other water release device in the system to direct the flow of water from the high-pressure water jetting system from Water Jet Supplier to a low-pressure area.
Use of safety valve: A safety valve can be installed in the high-pressure water jetting system from Water Jet Supplier. When the water pressure exceeds the set value, the safety valve will open automatically to divert the excess water flow to the low-pressure area, thus releasing the water pressure.
Use of other safety devices: in the water jet system can be used in other safety devices, such as pressure switches, pressure relief valves, etc., by detecting changes in water pressure or automatically adjust the water pressure to achieve the function of releasing water pressure.
It should be noted that the above methods are only temporary alternatives in the absence of a relief valve, and their effectiveness and safety may be inferior to that of a relief valve. Therefore, when purchasing and using water jet cutting machines, it is recommended to choose models with unloading valves or other safety devices to ensure the safety and reliability of the equipment.
Если вас интересует любая гидроабразивная продукция от Win-Win Поставщик гидроабразивной резки, Свяжитесь со мной, пожалуйста.
