Water Jet Parts 20474325 Stud, 1-18-12 X 18.31

Описание

Water Jet Parts: Stud, 1-18-12 X 18.31 20474325

Application: 90,000 psi waterjet intensifier pump

Сборка усилителя 72170165Сборка усилителя 72170165

Пункт

Номер деталиОписаниеКоличествоПунктНомер деталиОписаниеКоличество

1

05146592Прокладка, опора Topworks21472162253Вантуз

2

2

20476377Поддержка, Topworks21505130091Картридж гидравлического уплотнения

2

3

10118206Уплотнительное кольцо, 1,31×1,56× .1321672175989Фланец фиксатора втулки2

4

05144514Гидравлический цилиндр11772158494Узел уплотнения UHP

2

5

05098991Винт с торцевой головкой, 3/8-16×3-3/481872166738Цилиндр UHP

2

6

95688743Стопорная шайба, .3881972163802Лайнер

2

7

72101190Поршень в сборе12020474325Шпилька, 1-1/8-12×18.31

8

8

10074771Уплотнительное кольцо, 5,25×5,50× .1322172170157Уплотнительная головка в сборе

2

9

05120092Резервное кольцо, 5.25×5.50×.1322272178493Сборка фланца

2

10

72175997Гидравлическая головка блока цилиндров22320464590Плоская шайба, 1.13

8

11

05097886Винт с торцевой головкой, 3/4-16×2-1/4122420461761Шестигранная гайка, 1-1/8-12

8

12

05144183Распорка в сборе, бесконтактный выключатель22520489339Адаптер, JIC/труба, 50×.38

1

05144191

Уплотнительное кольцо, .69×.88×.092672176756Уплотнительное кольцо, 3,88×4,25× .19

6

13

72141569Комплект, бесконтактный выключатель2

72134224Бесконтактный переключатель

95119012

Винт с торцевой головкой, 1/4-20×1

Water Jet Parts Stud, 1-18-12 X 18.31 20474325
Water Jet Parts: Stud, 1-18-12 X 18.31 20474325

The studs used for a 90,000 psi waterjet intensifier pump are typically high-strength fasteners that are designed to withstand the extreme pressures and vibrations of the pump.

These studs are used to secure various water jet parts of the pump, such as the manifold, the cylinder, and the waterjet nozzle.

Here are some general characteristics of the studs used for a 90,000 psi waterjet intensifier pump:

1. High strength

The studs used for water jet parts of a 90,000 psi waterjet intensifier pump are typically made from high-strength materials, such as hardened steel or titanium, to help withstand the extreme pressures and vibrations of the pump.

2. Class rating

The studs used for water jet parts of a 90,000 psi waterjet intensifier pump are typically rated according to their strength and durability, with higher class ratings indicating greater strength and durability.

3. Thread type

The studs used for water jet parts of a 90,000 psi waterjet intensifier pump typically have a specific thread type, such as UNC or UNF, to ensure proper fit and alignment with other components of the pump.

4. Length and diameter

The length and diameter of the studs used for water jet parts of a 90,000 psi waterjet intensifier pump can vary depending on the specific application and requirements of the pump.

5. Thread pitch

The studs used for water jet parts of a 90,000 psi waterjet intensifier pump typically have a specific thread pitch, which is the distance between each thread.

The thread pitch is important for ensuring proper fit and alignment with other components of the pump.

6. Torque specifications

The studs used for water jet parts of a 90,000 psi waterjet intensifier pump are typically installed to a specific torque specification, which is the amount of force required to tighten the stud to the proper level.

Proper torque is important for ensuring that the stud is securely fastened and can withstand the extreme pressures of the pump.

7. Coating

Some studs may be coated with a protective substance, such as a corrosion-resistant coating or a lubricant, to help protect against wear and tear and to facilitate easier installation and removal.

90000 psi WATERJET 72134224
90,000psi Water Jet Parts

Contact us for assistance.