Описание
10078715 COLLAR,HP,3/8″ water jet fitting
Основные части насоса SL-IV 50 л.с.:
| Пункт | Номер продукта. | Наименование продукта | Картина |
| 1 | 05144647 | Цилиндр высокого давления |  |
| 2 | 05144688 | Узел уплотнительной головки |  |
| 3 | 05144696 | Прокладка уплотнительной головки |  |
| 4 | 05144712 | Гильза цилиндра |  |
| 5 | 05149703 | Сборка уплотнения |  |
| 6 | 05130091 | Гидравлический картридж |  |
| 7 | 05119151 | Керамический плунжер |  |
| 8 | 05116561 | Тарельчатый тарельник HP |  |
| 9 | 05116751 | Тарельчатая булавка |  |
| 10 | 05144670 | Фиксатор тарельчатого тарельника |  |
Знания для Станок гидроабразивной резки и Запасные части для гидроабразивной резки.
Dustproofing the cutting platform of water jet cutting machines
Dust-proofing the cutting platform of a Гидроабразивный фитинг water jet cutting machine is critical to ensure safety and cut quality during the cutting process. Here are some common ways to prevent dust:
Enclosed Cutting Chamber: Use an enclosed Гидроабразивный фитинг cutting chamber or cutting box to isolate the cutting area from the outside environment. This method can effectively prevent the slag, dust and spatter generated during the cutting process from spreading to the surrounding environment and keep the working area clean.
Dust-absorbing equipment: Specialized dust-absorbing equipment, such as vacuum cleaners and dust-removal systems, are equipped to absorb and collect the slag and dust generated during the cutting process. These devices are usually connected to the Гидроабразивный фитинг cutting machine and suck up the slag and dust directly through pipes Гидроабразивный фитинг or vacuum nozzles to minimize their diffusion in the air.
Water Sprinkler Systems: Water sprinkler systems are installed around the cutting area or on the cutting platform to control the dust and slag generated during the cutting process. Water spraying reduces the suspension of dust in the cutting area and reduces its diffusion into the air. In addition, water showers can serve to cool and clean the cutting area.
Guards and baffles: Appropriate guards and baffles are installed on the cutting platform to block the splashing of slag and spatter. These guards reduce the spread of waste slag and dust and provide additional safety protection against operator injury from splashes during the cutting process.
Regular cleaning: Regularly clean the cutting platform and surrounding area to promptly remove accumulated slag and dust. This reduces the accumulation of slag and dust, reduces the risk of its re-spreading, and keeps the work area clean and safe.
When selecting and using dust control methods, suitable dust control measures should be determined based on the specific cutting machine Гидроабразивный фитинг and working conditions. In addition, operators should always follow relevant safety procedures and personal protection requirements to ensure their safety and health.
Если вас интересует любая гидроабразивная продукция от Win-Win Поставщик гидроабразивной резки, Свяжитесь со мной, пожалуйста.
В видео ниже показан наш новый заказ на два усилительных насоса SL-VI (50 л.с.) 60000 фунтов/кв. дюйм гидроабразивная резка При тестировании, упаковка к отгружению:
