Описание
Parts for Water Pump: O-Ring, 3.88×4.25x.19 72176756
Сборка усилителя 72170165
Пункт | Номер детали | Описание | Количество | Пункт | Номер детали | Описание | Количество |
1 | 05146592 | Прокладка, опора Topworks | 2 | 14 | 72162253 | Вантуз | 2 |
2 | 20476377 | Поддержка, Topworks | 2 | 15 | 05130091 | Картридж гидравлического уплотнения | 2 |
3 | 10118206 | Уплотнительное кольцо, 1,31×1,56× .13 | 2 | 16 | 72175989 | Фланец фиксатора втулки | 2 |
4 | 05144514 | Гидравлический цилиндр | 1 | 17 | 72158494 | Узел уплотнения UHP | 2 |
5 | 05098991 | Винт с торцевой головкой, 3/8-16×3-3/4 | 8 | 18 | 72166738 | Цилиндр UHP | 2 |
6 | 95688743 | Стопорная шайба, .38 | 8 | 19 | 72163802 | Лайнер | 2 |
7 | 72101190 | Поршень в сборе | 1 | 20 | 20474325 | Шпилька, 1-1/8-12×18.31 | 8 |
8 | 10074771 | Уплотнительное кольцо, 5,25×5,50× .13 | 2 | 21 | 72170157 | Уплотнительная головка в сборе | 2 |
9 | 05120092 | Резервное кольцо, 5.25×5.50×.13 | 2 | 22 | 72178493 | Сборка фланца | 2 |
10 | 72175997 | Гидравлическая головка блока цилиндров | 2 | 23 | 20464590 | Плоская шайба, 1.13 | 8 |
11 | 05097886 | Винт с торцевой головкой, 3/4-16×2-1/4 | 12 | 24 | 20461761 | Шестигранная гайка, 1-1/8-12 | 8 |
12 | 05144183 | Распорка в сборе, бесконтактный выключатель | 2 | 25 | 20489339 | Адаптер, JIC/труба, 50×.38 | 1 |
05144191 | Уплотнительное кольцо, .69×.88×.09 | 26 | 72176756 | Уплотнительное кольцо, 3,88×4,25× .19 | 6 | ||
13 | 72141569 | Комплект, бесконтактный выключатель | 2 | ||||
| 72134224 | Бесконтактный переключатель | ||||||
95119012 | Винт с торцевой головкой, 1/4-20×1 |
What are some common operating conditions that can affect the lifespan of the O-ring parts for water pump?
1. Pressure
The higher the pressure, the greater the stress on the O-ring parts for water pump. Operating a pump at high pressures can cause the O-ring to wear out faster.
2. Temperature
Exposing the O-ring to temperatures outside the specific range (extreme temperatures, either hot or cold) can cause the material to degrade or harden, leading to cracking or other damage.
In addition, rapid temperature changes can cause the O-ring to expand or contract, which can affect its sealing ability.
3. Chemical exposure
Exposure to chemicals or corrosive fluids can cause the O-ring material to break down or deteriorate over time.
4. Abrasion
O-rings can wear out faster if they come into contact with abrasive materials or surfaces. This can cause the material to become rough or pitted, which can affect its sealing ability.
In addition, abrasive particles can get trapped between the O-ring and the sealing surface, causing additional wear and tear.
5. Frequency of use
The more frequently a pump is used, the more wearand tear there will be on the O-ring. This will make the material degrade faster and require more frequent replacement.
In addition, if the pump is not used frequently enough, the O-ring can dry out and become brittle, which can also lead to cracks or other damage.
6. Installation
Correct installation of the O-ring parts for water pump is crutial to its performance and lifespan.
If the O-ring is not seated correctly or is installed in a damaged or dirty groove, it may not be able to seal properly.
This can cause leaks or other problems and can also cause the O-ring to wear out faster.
Contact us for assistance.
