Описание
In the waterjet cutting system with industrial high pressure water pump, an actuator is a component that helps regulate the pressure of the high-pressure water by controlling the position of the intensifier plunger.
The actuator is typically located on the top of the intensifier pump and is connected to the plunger assembly.
Пункт | Номер детали | Описание | Количество | Пункт | Номер детали | Описание | Количество |
1 | 05146592 | Прокладка, опора Topworks | 2 | 14 | 72162253 | Вантуз | 2 |
2 | 20476377 | Поддержка, Topworks | 2 | 15 | 05130091 | Картридж гидравлического уплотнения | 2 |
3 | 10118206 | Уплотнительное кольцо, 1,31×1,56× .13 | 2 | 16 | 72175989 | Фланец фиксатора втулки | 2 |
4 | 05144514 | Гидравлический цилиндр | 1 | 17 | 72158494 | Узел уплотнения UHP | 2 |
5 | 05098991 | Винт с торцевой головкой, 3/8-16×3-3/4 | 8 | 18 | 72166738 | Цилиндр UHP | 2 |
6 | 95688743 | Стопорная шайба, .38 | 8 | 19 | 72163802 | Лайнер | 2 |
7 | 72101190 | Поршень в сборе | 1 | 20 | 20474325 | Шпилька, 1-1/8-12×18.31 | 8 |
8 | 10074771 | Уплотнительное кольцо, 5,25×5,50× .13 | 2 | 21 | 72170157 | Уплотнительная головка в сборе | 2 |
9 | 05120092 | Резервное кольцо, 5.25×5.50×.13 | 2 | 22 | 72178493 | Сборка фланца | 2 |
10 | 72175997 | Гидравлическая головка блока цилиндров | 2 | 23 | 20464590 | Плоская шайба, 1.13 | 8 |
11 | 05097886 | Винт с торцевой головкой, 3/4-16×2-1/4 | 12 | 24 | 20461761 | Шестигранная гайка, 1-1/8-12 | 8 |
12 | 05144183 | Распорка в сборе, бесконтактный выключатель | 2 | 25 | 20489339 | Адаптер, JIC/труба, 50×.38 | 1 |
05144191 | Уплотнительное кольцо, .69×.88×.09 | 26 | 72176756 | Уплотнительное кольцо, 3,88×4,25× .19 | 6 | ||
13 | 72141569 | Комплект, бесконтактный выключатель | 2 | ||||
| 72134224 | Бесконтактный переключатель | ||||||
95119012 | Винт с торцевой головкой, 1/4-20×1 |
The actuator works by using hydraulic pressure to move a piston that is connected to the plunger assembly.
As the piston moves, it adjusts the position of the plunger, which in turn regulates the pressure of the high-pressure water.
This helps ensure consistent and accurate cutting performance, even at high pressures.
The actuator used in 90,000 psi industrial high pressure water pump is designed to operate in high-pressure and high-temperature environments.
It is important to ensure that the water temperature and pressure are within the recommended range to prevent damage to the actuator and other components in the industrial high pressure water pump.
In addition to regulating the pressure of the high-pressure water, the actuator also plays a role in controlling the overall performance of the waterjet cutting system.
Issues with the actuator can lead to reduced cutting performance, increased operating costs, and safety hazards, such as unexpected shutdowns or damage to the pump.
Proper operation and maintenance of the actuator are essential for maintaining the performance and lifespan of the industrial high pressure water pump.
This includes following proper operational procedures, such as using the correct abrasive type, maintaining appropriate water pressure and temperature, and following proper lockout/tagout procedures during maintenance and repair tasks.
Over time, the actuator may wear out and require replacement.
When replacing the actuator, it is important to choose a high-quality replacement part that is compatible with the specific make and model of the industrial high pressure water pump.
It is also recommended to consult with our manufacturer or a qualified technician to ensure proper installation and calibration of the new actuator.
Любые другие вопросы, пожалуйста Свяжитесь с нами.
