Описание
Stud 20474325 applied to 90k psi waterjet intensifier pump.
Пункт | Номер детали | Описание | Количество | Пункт | Номер детали | Описание | Количество |
1 | 05146592 | Прокладка, опора Topworks | 2 | 14 | 72162253 | Вантуз | 2 |
2 | 20476377 | Поддержка, Topworks | 2 | 15 | 05130091 | Картридж гидравлического уплотнения | 2 |
3 | 10118206 | Уплотнительное кольцо, 1,31×1,56× .13 | 2 | 16 | 72175989 | Фланец фиксатора втулки | 2 |
4 | 05144514 | Гидравлический цилиндр | 1 | 17 | 72158494 | Узел уплотнения UHP | 2 |
5 | 05098991 | Винт с торцевой головкой, 3/8-16×3-3/4 | 8 | 18 | 72166738 | Цилиндр UHP | 2 |
6 | 95688743 | Стопорная шайба, .38 | 8 | 19 | 72163802 | Лайнер | 2 |
7 | 72101190 | Поршень в сборе | 1 | 20 | 20474325 | Шпилька, 1-1/8-12×18.31 | 8 |
8 | 10074771 | Уплотнительное кольцо, 5,25×5,50× .13 | 2 | 21 | 72170157 | Уплотнительная головка в сборе | 2 |
9 | 05120092 | Резервное кольцо, 5.25×5.50×.13 | 2 | 22 | 72178493 | Сборка фланца | 2 |
10 | 72175997 | Гидравлическая головка блока цилиндров | 2 | 23 | 20464590 | Плоская шайба, 1.13 | 8 |
11 | 05097886 | Винт с торцевой головкой, 3/4-16×2-1/4 | 12 | 24 | 20461761 | Шестигранная гайка, 1-1/8-12 | 8 |
12 | 05144183 | Распорка в сборе, бесконтактный выключатель | 2 | 25 | 20489339 | Адаптер, JIC/труба, 50×.38 | 1 |
05144191 | Уплотнительное кольцо, .69×.88×.09 | 26 | 72176756 | Уплотнительное кольцо, 3,88×4,25× .19 | 6 | ||
13 | 72141569 | Комплект, бесконтактный выключатель | 2 | ||||
| 72134224 | Бесконтактный переключатель | ||||||
95119012 | Винт с торцевой головкой, 1/4-20×1 |
The stud 20474325 pull rod is a mechanical component that is commonly used in 90k psi waterjet pumps.
It is a type of pull rod that is attached to a stud, which is a threaded fastener used to secure two or more components together.
The stud 20474325 pull rod is typically used to actuate a valve or other control mechanism in the 90k psi waterjet pump.
The stud is threaded into the valve body, and the pull rod is attached to the end of the stud that protrudes from the valve body.
When the pull rod is moved, it rotates the stud, which in turn opens or closes the valve, regulating the flow of water through the 90k psi waterjet pump.
The specific design and specifications of the stud pull rod used in a 90k psi waterjet pump may vary depending on the manufacturer and model of the pump.
Factors such as the length, diameter, and material of the pull rod may be optimized for maximum efficiency and reliability in the particular application.
In addition to its use in controlling the flow of water through the pump, the stud pull rod may also be used to actuate other components in the waterjet system, such as pressure relief valves or pressure intensifiers.
The design of the stud pull rod may also be tailored to the specific requirements of the 90k psi waterjet pump application.
For example, the pull rod may be made from a high-strength material such as titanium or stainless steel to withstand the high pressures and forces involved in the system.
The diameter and length of the pull rod may also be optimized for maximum efficiency and reliability, while still allowing for ease of movement and control.
Proper maintenance and inspection of the stud pull rod is important to ensure its continued reliability and performance.
Over time, the threads on the stud and pull rod may wear or become damaged, which could lead to a loss of control or other issues in the 90k psi waterjet pump.
Regular inspection and replacement of worn or damaged components can help prevent these problems and ensure the safe and efficient operation of the pump.
Contact us for assistance.
