Описание
49890825 SILENCER.SOLENOID VALVE.5.48.5 W 60000 psi waterjet
Основные части насоса SL-IV 50 л.с.:
| Пункт | Номер продукта. | Наименование продукта | Картина |
| 1 | 05144647 | Цилиндр высокого давления |  |
| 2 | 05144688 | Узел уплотнительной головки |  |
| 3 | 05144696 | Прокладка уплотнительной головки |  |
| 4 | 05144712 | Гильза цилиндра |  |
| 5 | 05149703 | Сборка уплотнения |  |
| 6 | 05130091 | Гидравлический картридж |  |
| 7 | 05119151 | Керамический плунжер |  |
| 8 | 05116561 | Тарельчатый тарельник HP |  |
| 9 | 05116751 | Тарельчатая булавка |  |
| 10 | 05144670 | Фиксатор тарельчатого тарельника |  |
Знания для Станок гидроабразивной резки и Запасные части для гидроабразивной резки.
Distance between water jet cutting head and pump of 60000 фунтов/кв. дюйм гидроабразивная резка
The distance between the 60000 фунтов/кв. дюйм гидроабразивная резка water jet cutting head and the pump usually depends on the specific water jet cutting system and application requirements. In general, the distance between the water jet cutting head and the pump can be maintained in the range of a few meters to tens of meters. Here are some considerations and common distance configurations:
Water Pressure Loss: Water undergoes pressure loss during delivery, so in water jet cutting systems it is often necessary to place the cutting head 60000 фунтов/кв. дюйм гидроабразивная резка as close to the pump as possible to minimize pressure loss. A shorter distance can help keep the cutting head under higher water pressure to ensure cutting effectiveness and speed stability.
Pump and cutting head connection: The 60000 фунтов/кв. дюйм гидроабразивная резка pump in a water jet cutting system usually delivers a high pressure stream of water to the cutting head, so a connecting pipe is needed to connect the pump to the cutting head. The distance needs to be set taking into account the length and diameter of the connecting pipe to ensure adequate water flow supply and pressure stability.
Range of motion of the water jet cutting head: Depending on the specific cutting requirements, the water jet cutting head 60000 фунтов/кв. дюйм гидроабразивная резка may need to be moved and positioned on the workpiece. Therefore, when installing the cutting head, sufficient distance needs to be set aside to ensure that the cutting head can cover the required cutting area.
It should be noted that the distance setting needs to be evaluated and adjusted according to the specific water jet cutting system 60000 фунтов/кв. дюйм гидроабразивная резка and application requirements. It is recommended to refer to the guidance provided by the manufacturer of the water jet cutting machine or consult a specialized water jet cutting system 60000 фунтов/кв. дюйм гидроабразивная резка supplier for accurate distance configuration recommendations.
Если вас интересует любая гидроабразивная продукция от Win-Win Поставщик гидроабразивной резки, Свяжитесь со мной, пожалуйста.
В видео ниже показан наш новый заказ на два усилительных насоса SL-VI (50 л.с.) 60000 фунтов/кв. дюйм гидроабразивная резка При тестировании, упаковка к отгружению:
