Descrição
Waterjet Replacement: Plunger
Usage: used on both sides of the hydraulic cylinder, there will be two plungers on a waterjet intensifier
Waterjet tools:
| Número do item | Descrição |
| 20494488 | Vee block cradle |
| 10079523 | 3/8″ plug |
| 10078129 | 3/8″ gland fitting |
| 10148674 | Seal removal tool |
| 05066139 | Cylinder wrench |
| 80078330 | Seal removal tool stand |
| 80079239 | End cap wrench |
Related Waterjet Replacement:
| Número do item | Descrição |
| 05059712 | HP Cylinder |
| 20417081 | Sealing Head Assembly |
| 20422243 | HP Seal Assembly |
| 10110393 | Seal Assembly |
| 80086622 | Hydraulic Cartridge Seal Assembly |
| 05007786 | Flange do Retentor de Buchas |
| 05127584 | Interruptor de proximidade |
FAQ of waterjet cutting machine & waterjet replacement:
How to use waterjet cutting machine correctly?
The use of water cutting machines needs to follow certain operating procedures to ensure safety and correctness. Here are some basic steps and considerations:
Confirm the suitability of the workpiece and the cutting machine: Before using the waterjet machine, it is necessary to confirm whether the material and shape of the workpiece are suitable for cutting with the waterjet machine. At the same time, it is necessary to confirm whether the parameters and configuration of the cutting machine are suitable for the required cutting process.
Install and adjust the waterjet replacement cutting head and cutting table: Before using the waterjet machine, the waterjet replacement cutting head and cutting table need to be installed and adjusted correctly. This includes adjusting the height and angle of the cutting head, as well as adjusting the levelness and verticality of the cutting table.
Setting cutting parameters: Before using the waterjet machine, it is necessary to set the correct cutting parameters according to the material and shape of the workpiece and the cutting requirements. This includes parameters such as water pressure, abrasive flow, cutting speed, depth of cut, etc.
Start the cutting machine: After setting the cutting parameters, you can start the cutting machine for cutting. Before starting the cutting machine, it is necessary to ensure that the position and condition of the cutting head and cutting table are correct, and the operator should keep a safe distance.
Monitoring the cutting process: During the cutting process, it is necessary to continuously monitor the cutting status and parameters, and adjust the cutting parameters and the position of the cutting head in time to ensure the cutting quality and efficiency.
Shut down the cutting machine: After the cutting is completed, the cutting machine needs to be shut down for cleaning and maintenance. This includes cleaning abrasives and scale from the cutting head and cutting table, and checking that all waterjet replacement of the cutting machine are working properly.
When using a water cutting machine, you need to pay attention to safety and environmental protection. Operators should wear protective equipment such as ear plugs, glasses, and gloves to avoid exposure to high-pressure water and abrasives. At the same time, water and abrasives need to be used rationally to reduce waste and protect the environment.
Please contact us if you need producing waterjet product!
