Descrição
Waterjet cutting parts 05034764 hydraulic cylinder
Installation: installed in the middle of the waterjet pump, connect with the hydraulic cylinder head
The water jet cylinder is kind of waterjet cutting parts and important part of the water jet equipment used to provide high-pressure water. It is normally connected with a piston, a ceramic rod, etc.
Do you know what’s the function of the hydraulic cylinder on the waterjet pump?
The working principle is to use the oil pump to push the piston in the oil cylinder from one side to the other to form power. Pushing the ceramic rod in the piston squeezes the water creating high pressure
Do you know how to do the maintenance of the water jet cylinder?
There are mainly includes the following aspects:
1: Check whether the oil pump motor unit is working normally, whether there is oil intake, reverse rotation, abnormality, etc. If so, it is necessary to adjust the power phase or repair or replace the oil pump motor.
Check whether the reversing Hall switch is working normally and whether it can control the action of the reversing valve. If not, check the circuit or replace the reversing Hall switch.
2. Check whether the reversing valve is working normally and whether it can control the reversing of the oil cylinder. If not, the reversing valve needs to be cleaned or replaced. 3. Check whether the relief valve is working normally and whether it can control the pressure of the oil cylinder. If not, the relief valve needs to be adjusted or replaced.
4. Check whether the oil cylinder seal is working normally, whether there is oil leakage, wear and other phenomena, if so, the oil cylinder seal needs to be replaced.
There are some waterjet cutting parts need to do regular maintenance, waterjet suppliers should send the waterjet users manual files for the waterjet cutting parts.
