Descrição

11392 3/8 Redutor de jato de água consumível

Knowledge of waterjet cutting machine and waterjet consumable:

Q1: What is the reason for the high temperature of the water jet pump?

The reasons for the high temperature of the water jet pump may be as follows

• The pressure of the water jet is too high, causing the kinetic energy of the water jet to be converted into heat energy, which makes the pump body and the nozzle hot;

• The flow rate of the water jet is too small, resulting in insufficient cooling effect of the water jet, which makes the pump body and nozzle hot;

• The water jet medium is impure, contains impurities or air bubbles, which affects the stability and cooling effect of the water jet, and makes the pump body and nozzle heat;

• The inlet and outlet pipes of the water jet are not smooth, which will lead to the backflow or blockage of the water jet, increase the load and friction of the pump body, and make the pump body and nozzle heat.

In order to avoid the temperature of the water jet pump from being too high, the following points should be paid attention to:

• Select the appropriate water jet pressure and flow rate, adjust the water jet parameters according to the work needs and equipment performance, avoid too high or too low;

• Choose a suitable water jet medium, use pure water or add an appropriate amount of preservatives, lubricants, etc., to avoid the generation of impurities or air bubbles;

• Choose a suitable water jet pipeline, use a pipeline of sufficient thickness and length to ensure smooth and stable water jet flow, and avoid backflow or blockage;

• Regularly check and clean water jet equipment, find and eliminate faults in time, and keep water jet pumps, waterjet consumable nozzles, pipes and other waterjet consumable in good condition.