Descrição
05049812 HASTE, MONTAGEM TOPWORKS, SLIV CABEÇA WATERJET
| Item | Product NO. | Product Name | Picture |
| 1 | 05144647 | HP Cylinder |  |
| 2 | 05144688 | Sealing head assembly |  |
| 3 | 05144696 | Sealing head spacer |  |
| 4 | 05144712 | Cylinder liner |  |
| 5 | 05149703 | Seal assembly |  |
| 6 | 05130091 | Hydraulic cartridge |  |
| 7 | 05119151 | Ceramic plunger |  |
| 8 | 05116561 | HP poppet |  |
| 9 | 05116751 | Poppet pin |  |
| 10 | 05144670 | Poppet retainer |  |
Conhecimento para máquina de corte por jato de água e waterjet spare parts.
About the maintenance intervals of Water Jet Cutting Robotic Workstation from Win-Win head waterjet?
The maintenance intervals of a water jet cutting robotic workstation from Win-Win head waterjet depend on a variety of factors, such as the robot’s specifications, brand, frequency of use, and working environment. Here are some common maintenance intervals for water jet cutting robot workstations from Win-Win head waterjet:
Hydraulic oil change intervals: Hydraulic oil change intervals are usually every 6 months to once a year, depending on how often the robot is used and the working environment.
Hydraulic line inspection cycle: the hydraulic line inspection cycle is usually every 3 months to half a year, depending on the frequency of use of the robot and the working environment.
Mechanical Component Inspection Intervals: Mechanical component inspection intervals are typically every 6 months to once a year, depending on the frequency of use and the environment in which the robot is operating.
Electrical system check intervals: Electrical system check intervals are typically every 6 months to a year, depending on how often the robot is used and the working environment.
Position sensor calibration intervals: Position sensors are typically calibrated every 6 months to once a year, depending on how often the robot is used and the operating environment.
It should be noted that the above maintenance intervals are for reference only, and the specific intervals should be adjusted according to the actual situation. At the same time, the maintenance of the robot should be recorded and tracked in order to identify and solve problems in a timely manner to ensure the normal operation of the robot and cutting results.
If you are interested in any waterjet products from Win-Win Water Jet Supplier, contact me please.
The below is our robot waterjet cutting workstaion.
