Descrição

ABB Robotics Spare Parts

Item number: 3HAC028357-001

Item name: Teach Pendant

Detalhes: used on the ABB robot arms

Win-Win provide robot waterjet solutions, ABB robotics spare parts, etc.

Related robot waterjet cutting workstation & ABB robotics spare parts:

Robotic waterjet cutting system & Robot Waterjet Cell Parts: Yaskawa robotic waterjet workstation and related parts, Fanuc robotic waterjet workstation and related parts , ABB robotic waterjet workstation and ABB robotics spare parts.

FAQ of platform waterjet machine & robot waterjet system & ABB robotics spare parts:

A. Does robotic water jet cutting produce waste or pollution?

Robotic water jet cutting is a relatively clean cutting technology that produces less pollution and waste than other traditional thermal or mechanical cutting methods. However, there are still some waste and potential pollution issues to consider:

Abrasive waste: When abrasives are used for water jet cutting, the cutting process generates abrasive waste that mixes with the material being cut. These wastes need to be treated through a filtration system and then disposed of appropriately. Untreated abrasive waste can be harmful to the environment and therefore proper disposal procedures need to be followed.

Wastewater: The cutting process generates a large amount of wastewater. Although most of the wastewater is relatively clean, if it contains abrasives, metal powders, or other contaminants, it will need to be properly filtered or treated before it can be discharged.

Waste from Cut Material: The edges of a water jet cut are usually clean, but the cutting process may still produce some tiny metal or material fragments. These fragments need to be collected and disposed of through the system’s filters.

Noise: Although not a material contaminant, the high-pressure water jet cutting process can generate a certain amount of noise, which can have an impact on the working environment.

To minimize potential environmental impacts, many water jet cutting systems are equipped with advanced filtration and waste treatment equipment. In addition, there are also some systems that offer water recycling and reuse capabilities, which further reduces the generation of wastewater.

In conclusion, robotic water jet cutting is a relatively environmentally friendly option compared to other cutting techniques, but the waste and pollution it generates still needs to be considered and managed. Ensuring that local environmental regulations and best practices are followed can minimize its impact on the environment.

B. What are the typical dimensions of a robotic water jet cutting workstation? How much space is needed to house and operate it?

The size of a robotic water jet cutting workstation and the space required can vary depending on the specific application and needs. Here are some key factors that influence these dimensions:

Size and type of robot: the size and operating range of small and large robots vary greatly. For example, a small robotic workstation built for small parts will be much smaller than one built for large parts or complete vehicle components.

Size of the cutting table: The cutting table is where the robot will place the material it will cut. Larger tables can handle larger pieces of material, but they also require more space.

Equipment attachments (ABB robotics spare parts): This may include water recovery systems, abrasive storage and supply systems, filters, cooling systems, and more. These add-ons may require additional space.

Space for operation and maintenance: Operators need enough space for daily operations, robot programming and maintenance work.

Considering the above factors, the following is a rough estimate:

Small workstations: The size of space that may be required is from 3m x 3m to 5m x 5m.
Medium-sized workstations: The space required may range from 6m x 6m to 10m x 10m.
Large workstations: may require a space size of 10m x 10m or more, depending on the design and application of the workstation.
Again, these are only rough estimates. If considering the purchase of a robotic waterjet cutting workstation, it is recommended that you contact the supplier or manufacturer directly for specific information on dimensions and space requirements. Additionally, make sure to reserve enough space, not only for the machine itself, but also for safety, ease of operation and maintenance.

We are the supplier of waterjet cutting machine, robot waterjet workstation and also related ABB robotics spare parts etc. If you are looking these products, welcome to leave us message, we will get back to you asap.

To learn more about Win-Win Waterjet products, please access the following links:

https://www.youtube.com/channel/UC-D9PKZlhw2fZhMnnzefcgQ/