Descrição

90K Water Jet Cutting Machine Parts: Tee 20455812

Item	Part Number	Descrição	Quantity	Item	Part Number	Descrição	Quantity
1	05146592	Gasket, Topworks Support	2	14	72162253	Plunger	2
2	20476377	Support, Topworks	2	15	05130091	Hydraulic Seal Cartridge	2
3	10118206	O-Ring, 1.31×1.56× .13	2	16	72175989	Flange do Retentor de Buchas	2
4	05144514	Hydraulic Cylinder	1	17	72158494	UHP Seal Assembly	2
5	05098991	Socket Head Screw, 3/8-16×3-3/4	8	18	72166738	UHP Cylinder	2
6	95688743	Lock Washer, .38	8	19	72163802	Liner	2
7	72101190	Piston Assembly	1	20	20474325	Stud, 1-1/8-12×18.31	8
8	10074771	O-Ring, 5.25×5.50× .13	2	21	72170157	Sealing Head Assembly	2
9	05120092	Backup Ring, 5.25×5.50× .13	2	22	72178493	Flange Assembly	2
10	72175997	Hydraulic Cylinder Head	2	23	20464590	Flat Washer, 1.13	8
11	05097886	Socket Head Screw, 3/4-16×2-1/4	12	24	20461761	Hex Nut, 1-1/8-12	8
12	05144183	Spacer Assembly, Proximity Switch	2	25	20489339	Adapter, JIC/Pipe, 50× .38	1
	05144191	O-Ring, .69× .88× .09		26	72176756	O-Ring, 3.88×4.25× .19	6
13	72141569	Kit, Proximity Switch	2
	72134224	Interruptor de proximidade
	95119012	Socket Head Screw, 1/4-20×1

A Tee is one of water jet cutting machine parts that is commonly used in 90k intensifier pumps.

The Tee fitting gets its name from its T-shaped cross-section, which has one input and two outputs.

In a waterjet pump, Tees may be used to split the flow of water between two different water jet cutting machine parts, such as the pump and the cutting head.

They may also be used to combine the flow from two different sources, or to change the direction of flow within the system.

The specific design and specifications of the Tee used in a 90k waterjet pump may vary depending on the manufacturer and model of the pump, as well as the specific application within the system.

Factors such as the diameter, wall thickness, and material of the Tee may be optimized for maximum efficiency and reliability in the particular application.

Tees are made from various materials, containing metals like stainless steel or brass, or plastics like PVC or polypropylene.

The choice of material depends on factors such as the pressure and temperature of the system, as well as the presence of any corrosive or abrasive substances in the fluid being pumped.

Proper installation of the Tee fitting is important to ensure the safe and efficient operation of the waterjet pump.

The Tee fitting should be installed in the correct orientation, with the input and output branches aligned properly with the flow of water through the system.

The fitting should be securely fastened using appropriate hardware, such as bolts or clamps.