90000 psi Waterjet 72159791 Manifold Assembly, D08

Categoria:

Descrição

Introducing the 72159791 Manifold Assembly, D08 for 90000 psi Waterjet Pumps

If you’re looking for a reliable and efficient way to control the flow of fluids in your 90000 psi waterjet pump, look no further than the 72159791 Manifold Assembly, D08.

It is a fluidic module that serves as the primary control point for all reagents, samples, rinse, and other fluids flowing throughout the device, from entry ports to waste tubing exit ports.

In the following part, we’ll take a closer look at the manifold assembly, its features, and how it can benefit your high pressure water cutting applications.

90000 psi Waterjet 72182795 Hydraulic Power Package
90000 psi Waterjet 72182795 Hydraulic Power Package

Item

Part Number DescriçãoQuantityItem Part Number Descrição

Quantity

1

61125453Hex Head Screw, 3/4-10 x 2-1/442005103429Spline Shaft1

2

95688735Lock Washer, .7582105103411Adapter, Water Pump1

3

72153521Electric Motor, 60 HP12205103395Shaft Coupling1

4

10082022Flange, Motor/Pump12320481206Water Pump1

5

05103239Piston Pump12495838314Lock Washer, .253

6

10192961Socket Head Screw, M12 x 1.75 x 30MM22595572897Socket Head Screw, 1/4-20 x 5/83

7

10069763Flat Washer, .5022695750394Lock Washer, .382

8

72159791Manifold Assembly, D0812705041033Socket Head Screw, 3/8-16 x 1-1/42

9

80086150Adapter, ORB/JIC, 1.0 x 1.012895897294Hex Head Screw, 5/8-11 x 1-1/24

10

05091301Hydraulic Pump12995688719Lock Washer, .634

11

10091510Arrow Decal13080087513Flat Washer, .634

12

05103247Socket Head Screw, 1/2-13 x 643120469936Relief Valve Assembly, 180 Bar1

13

95688750Lock Washer, .5043295897286Hex Head Screw, 5/8-11 x 34

14

49882087O-Ring, 1.88 x 2.13 x .1313395688719Lock Washer, .634

16

05085758Adapter, ORB/JIC, .38 x .2513480087513Flat Washer, .634

17

10118057Plug, ORB, .7513520484771Motor Mount4

19

72158528Coupling, Flexible Drive1Ref 105112727O-Ring, 104MM x 3MM

Ref 249891195O-Ring, 2.75 x 3.0 x .13

What is a Waterjet Intensifier?

Before we dive into the manifold assembly, let’s first understand the basics of waterjet technology.

A waterjet intensifier is a type of pump that uses hydraulic power to increase water pressure, usually at a ratio of 20:1.

Unlike direct drive pumps using a crank to drive the pump’s plunger, the intensifiers use a hydraulic cylinder.

This allows for higher pressure output while reducing maintenance requirements.

90000 psi Waterjet 72159791 Manifold Assembly, D08
90000 psi Waterjet 72159791 Manifold Assembly, D08

The Role of Manifold Assembly in Waterjet Pumps

The manifold assembly is a crucial component in any waterjet pump.

It serves as the primary control point for all fluids flowing through the device.

With the 72159791 Manifold Assembly, D08, you can easily regulate the flow of reagents, samples, rinse, and other fluids from entry ports to exit ports leading to waste tubing.

By ensuring smooth and efficient operation, the 72159791 Manifold Assembly, D08, helps to minimize the risk of costly repairs and downtime for your waterjet pump.

Features of the 72159791 Manifold Assembly, D08

The 72159791 Manifold Assembly, D08, is designed to meet the demands of high pressure water cutting applications. Here are some of its key features:

– High-strength stainless steel construction for durability and corrosion resistance

– Precision-machined components for accurate fluid control

– Easy-to-use design with labeled ports for quick and simple installation

– Compatible with a range of 90000 psi waterjet pumps for versatile use

The manifold assembly starts with an electric (or gas/diesel driven motor) turning a hydraulic pump producing hydraulic oil pressure of around 3,000 PSI.

Hydraulic accumulators and intensifiers serve different functions in hydraulic circuits.

An accumulator stores oil under pressure and releases it to the system when needed, similar to a flywheel or capacitor in mechanical and electrical systems.

On the other hand, an intensifier increases the pressure in the hydraulic circuit.

How to Install the 72159791 Manifold Assembly, D08

  1. Turn off the power to your waterjet pump and disconnect any hoses or tubing.
  2. Remove the old manifold assembly and clean the mounting surface.
  3. Install the new manifold assembly and secure it in place using the provided hardware.
  4. Connect the hoses and tubing to the labeled ports on the manifold assembly.
  5. Turn on the power to your waterjet pump and test the flow of fluids through the device.

Benefits of Using the 72159791 Manifold Assembly, D08

By using the 72159791 Manifold Assembly, D08, in your 90000 psi waterjet pump, you can enjoy the following benefits:

– Improved fluid control for more precise cutting

– Reduced risk of downtime and costly repairs

– Versatile use with a range of high pressure water cutting applications

– Easy installation and maintenance for hassle-free operation

High pressure water can be used as a cutting tool in engineering applications.

This method involves using the energy from ultra-high pressure, high-density water projected through a small-bore nozzle to cut objects.

The water is pressurized to a maximum of 392 MPa for effective cutting.

Conclusão

If you’re looking for a reliable and efficient way to control the flow of fluids in your 90000 psi waterjet pump, consider the 72159791 Manifold Assembly, D08.

With its high-strength stainless steel construction, precision-machined components, and easy-to-use design, it provides accurate fluid control and reduces the risk of downtime and costly repairs.

Plus, its compatibility with a range of waterjet pumps makes it a versatile choice for high pressure water cutting applications.

The manifold assembly is a crucial component in any waterjet pump, serving as the primary control point for all fluids flowing through the device.

With the 72159791 Manifold Assembly, D08, you can easily regulate the flow of reagents, samples, rinse, and other fluids from entry ports to exit ports leading to waste tubing.

One of the key features of the 72159791 Manifold Assembly, D08, is its high-strength stainless steel construction.

This ensures durability and corrosion resistance, making it ideal for use in harsh environments.

The precision-machined components of the manifold assembly provide accurate fluid control, allowing for more precise cutting.

The easy-to-use design with labeled ports also ensures quick and simple installation, reducing the risk of errors during installation that can lead to costly repairs.

By using the 72159791 Manifold Assembly, D08, in your 90000 psi waterjet pump, you can enjoy improved fluid control for more precise cutting.

This is especially critical for applications that require high precision cutting, such as in the aerospace and automotive industries.

Moreover, the manifold assembly reduces the risk of downtime and costly repairs, ensuring that your waterjet pump operates smoothly and efficiently.

The 72159791 Manifold Assembly, D08, is compatible with a range of high pressure water cutting applications, making it a versatile choice for different industries.

The easy installation and maintenance of the manifold assembly also ensure hassle-free operation, reducing the need for frequent maintenance and repairs.

In conclusion, the 72159791 Manifold Assembly, D08, is a crucial fluidic module for any 90000 psi waterjet pump.

It provides accurate fluid control, reduces the risk of downtime and costly repairs, and is compatible with a range of high pressure water cutting applications.

Its high-strength stainless steel construction, precision-machined components, and easy-to-use design make it a reliable and efficient choice for different industries.

Consider the 72159791 Manifold Assembly, D08, for your high pressure water cutting applications to ensure more precise cutting and hassle-free operation.

Any other requirements for 90000 psi waterjet intensifier pump or high pressure water cuttingPor favor fale conosco.