Descrição

90000 psi Waterjet Pump Spare Parts: 95119012 Socket Head Screw, 1/4-20 x 1

Item	Part Number	Descrição	Quantity	Item	Part Number	Descrição	Quantity
1	05146592	Gasket, Topworks Support	2	14	72162253	Plunger	2
2	20476377	Support, Topworks	2	15	05130091	Hydraulic Seal Cartridge	2
3	10118206	O-Ring, 1.31×1.56× .13	2	16	72175989	Flange do Retentor de Buchas	2
4	05144514	Hydraulic Cylinder	1	17	72158494	UHP Seal Assembly	2
5	05098991	Socket Head Screw, 3/8-16×3-3/4	8	18	72166738	UHP Cylinder	2
6	95688743	Lock Washer, .38	8	19	72163802	Liner	2
7	72101190	Piston Assembly	1	20	20474325	Stud, 1-1/8-12×18.31	8
8	10074771	O-Ring, 5.25×5.50× .13	2	21	72170157	Sealing Head Assembly	2
9	05120092	Backup Ring, 5.25×5.50× .13	2	22	72178493	Flange Assembly	2
10	72175997	Hydraulic Cylinder Head	2	23	20464590	Flat Washer, 1.13	8
11	05097886	Socket Head Screw, 3/4-16×2-1/4	12	24	20461761	Hex Nut, 1-1/8-12	8
12	05144183	Spacer Assembly, Proximity Switch	2	25	20489339	Adapter, JIC/Pipe, 50× .38	1
	05144191	O-Ring, .69× .88× .09		26	72176756	O-Ring, 3.88×4.25× .19	6
13	72141569	Kit, Proximity Switch	2
	72134224	Interruptor de proximidade
	95119012	Socket Head Screw, 1/4-20×1

The Socket Head Screw 95119012 is a specific type of fastener that has a cylindrical head with a hexagonal socket drive in the head.

This type of screw is also commonly referred to as a “Allen screw” or “hex socket head screw.”

The size of the Socket Head Screw 95119012 is 1/4-20 x 1, which means it has a 1/4 inch diameter and a 20 threads per inch pitch. The length of the screw is 1 inch (or 25.4 millimeters).

The Socket Head Screw 95119012 is commonly used in 90000 psi pump applications where a strong, secure fastening is needed.

The hexagonal socket drive in the head allows for easy installation and tightening with an Allen wrench or hex key.

The Socket Head Screw 95119012 often used in applications where there is limited space for tool access in 90000 psi pump, as the hexagonal socket drive allows for a more compact design than other types of fasteners.

They are also often used in applications where a flush-mounting of the screw head is desired, as the cylindrical head of the socket head screw can be countersunk into the surface it is being fastened to.

The Socket Head Screw 95119012 may be used in a variety of applications, depending on the specifications and requirements of the project.

90000 psi Waterjet Intensifier Pump:

Here are some general torque values for Socket Head Screws based on the size and material of the screw:

– Steel Socket Head Screws:

– 1/4 inch: 7-10 ft-lbs

– 5/16 inch: 15-20 ft-lbs

– 3/8 inch: 30-35 ft-lbs

– 1/2 inch: 60-65 ft-lbs

– Stainless Steel Socket Head Screws:

– 1/4 inch: 6-8 ft-lbs

– 5/16 inch: 12-15 ft-lbs

– 3/8 inch: 25-30 ft-lbs

– 1/2 inch: 50-55 ft-lbs

– Titanium Socket Head Screws:

– 1/4 inch: 4-5 ft-lbs

– 5/16 inch: 8-10 ft-lbs

– 3/8 inch: 18-20 ft-lbs

– 1/2 inch: 35-40 ft-lbs

It’s important to note that these torque values are only guidelines and may need to be adjusted based on the specific requirements of the application.

It’s also important to use a calibrated torque wrench to ensure accurate torque values and toperform a torque test if necessary to ensure that the Socket Head Screw is installed with the appropriate clamping force.

Additionally, our screw manufacturer provides torque charts specific to the products, which may include additional information such as recommended torque values for different grades or finishes of the same size of screw.

It’s always a good idea to consult our manufacturer’s recommendations when available.