The on/off valve seal of the water jet cutting machine waterjet tools is very important, because a bad on/off valve seal will lead to water leakage, which will affect the cutting quality and equipment life. The following are precautions for using the on/off valve seal of the water jet cutting machine:

Regular check: check the condition of the waterjet tools on/off valve seal regularly to make sure there is no rupture or wear at the seal, and if there is any problem, it needs to be replaced in time.

Do not over tighten: Do not over tighten the waterjet tools on/off valve seal as this will damage the gasket and cause leakage. It should be tightened moderately and with the correct tool.

DO NOT OVERLOOSE: Do not loosen the waterjet tools on/off valve seal too much as this will cause water to leak. The seal should be moderately tightened to ensure a good seal.

Use the correct gasket: Use the correct gasket to ensure that the contact surface between the gasket and the on/off valve seal is smooth and will not affect the sealing effect.

Prevent contamination: Avoid accumulation of garbage and dust at the waterjet tools on/off valve seal to avoid contamination of the seal, which will affect the sealing effect.

Maintain the sealing place: Clean and maintain the sealing place regularly to keep the sealing place clean and smooth.

Pay attention to the temperature of the water: The waterjet tools on/off valve sealing place of the water jet cutting machine generally cannot bear high temperature.

In a word, the precautions for using the waterjet tools on/off valve seal of water jet cutting machine mainly include regular checking, don’t over-tighten and over-loosen, use the right gasket, prevent contamination, maintain the sealing place and pay attention to the temperature of the water, etc. These precautions can ensure the sealing effect of the on/off valve seal, prolong the life span of the equipment, and ensure the quality of the cutting.