Como escolher o equipamento de corte por jato de água?
At present, water jet cutting accumulators are divided into two categories in the water jet cutting industry. One is accumulators with rubber seal structures. This type of accumulator has been eliminated. Water jet cutting accumulators need to withstand 60kpsi water pressure. It is very high, so the rubber seal is easy to break, causing water leakage, so no matter what structure the accumulator with rubber seal can not be used for a long time, it is not recommended for customers to use the accumulator with rubber seal. The other is without Rubber-sealed accumulators.
There are many types of accumulators in this structure, such as tie rod structure, plug structure, double-layer structure, etc. But we recommended using the overall structure, end caps on both sides, and high-strength screws. , this structure is a very stable structure currently in use, and the pass rate is basically 99%. The simple and effective structure is reliable. If the accumulator of your water jet cutting equipment needs to be replaced after one or two months of use,
how to choose the water jet cutting equipment?
it is recommended that you replace it with the overall structure, no rubber-sealed accumulator, which will save you time and improve efficiency, the overall structure of the accumulator does not require maintenance, and the service life is as long as ten years.
The larger the pressure of the water jet cutting machine, the more stable the pressure of the water cutting machine, but at the same time, there are high requirements for the material and installation process of the accumulator itself. Win-Win company has produced water jet cutting equipment for 20 years.
After market inspection, it has finally used the overall structure without rubber sealed accumulator, currently there is no customer feedback on accumulator leakage, breakage, etc. If you have accumulators that are often broken, please contact us, we will give you good suggestions to solve this problem.
What are the new technologies of water jet cutting equipment?
Como escolher o equipamento de corte por jato de água?
Regarding other parts of water jet machine, some improvements have been made compared to traditional water jet cutting. The first is the improvement of high-pressure water seal. In many new-generation water jet cutting equipment, part of the high-pressure water seal has been removed. As we all know,
The water jet cutting machine uses high-pressure water for cutting. When the machine is working, the pressure can reach 60,000psi-90,000psi.
Como escolher o equipamento de corte por jato de água?
It can be said that the pressure is very high. This is a severe test for the high-pressure water seal. In the new equipment, the plug and the metal cones are used to seal the high-pressure cylinders. This structure cancels the rubber high-pressure water seal. This principle is the same as that of the accumulator.
At present, there is no better way than this structure. If the customer needs water jet cutting equipment upgrade, you can replace the accumulator and plug head and high pressure cylinder, this is a very good solution
Como escolher o equipamento de corte por jato de água?
Como escolher o equipamento de corte por jato de água?
The choice of water jet cutting equipment is mainly judged according to the stability of the product. Any product, as long as it has enough stability, will be a worry-free equipment that can create profits.
The stability of water jet cutting equipment is inspected from the following points :how to choose the water jet cutting equipment?
1: Equipment configuration, the stability of the water jet cutting equipment itself is one aspect, and it must also match the configuration of other units, such as a good cooling system, a good softened water system, etc.
2: The test before leaving the factory, the general equipment is tested for 24 hours before leaving the factory, and it works continuously, which is very important
3: The material of the water jet cutting equipment body and the steel plate thickness of the fuselage. The material used for the water cutting equipment machine tool produced by WIN-WIN company is 6mm thick metal
4: The intensifier pump is the key. The core of the intensifier pump must be common in the market, so that it is easy to buy parts in the later stage. If you choose a customized model for the price of the early equipment, then the later parts will be very expensive.
5: Customer praise, the customer’s evaluation is a real reaction, every equipment of WIN-WIN company has made customers feel satisfied in the past 20 years, and continues to use it, and the current effect is very good
6: Installation and commissioning: WIN-WIN supports remote installation and commissioning, and we have modularized the equipment. Customers only need to simply connect the corresponding sockets. The remote commissioning is very successful and saves a lot of money for customers.
How to choose the function of the machine tool? What are the differences between AC five-axis water jet cutting and three-axis?
Como escolher o equipamento de corte por jato de água?
how to choose the water jet cutting equipment? First, customers can tell us the cutting materials and process of water jet cutting equipment, and we can recommend models according to customer requirements. Many customers are worried that they do not understand water jet cutting. In fact, they can use equipment to cut out the parts that customers need.
WIN-WIN has the complete process of using the equipment, as well as the tile mosaic process, metal cutting process, etc., inexperienced customers do not have to worry at all. At present, the water jet cutting equipment is for the whole world. We have done a lot of technical upgrades to be able to be used globally, so that customers don’t need to worry about operating the equipment at all. Generally,
They can learn the cutting functions of water jet cutting equipment in one day, and can use it proficiently and complete the cutting of parts in two days.
.
