CP022031/069 Piston Waterjet Intensifier Parts

Category:

Description

Waterjet Intensifier Parts CP022031/069 Piston Waterjet Cutting Spare Parts for Waterjet Cutting Machine

FAQ for Waterjet Cutting Machine and Waterjet Intensifier Parts:

Related products you need to prepare for the machine
ItemProduct NameRemark
1No. 46 anti-wear hydraulic oil (180L)Hydraulic Oil for machine
2A number of No. 32 hydraulic oil (or lubricating oil of the same grade)For cutting table lubricant
3Air pump (maximum 0.8MP air source is required, and the machine provides an air pipe with an air source connector of φ6)For abrasive tank and air valve
4Water source (the pressure of the softened water source is not less than 0.4MPa, the joints providing the water source must be made of PVC pipes, the outer diameter of the water inlet pipe is 32mm, the inner diameter is 25.4mm; the outlet pipe, the outer diameter is 20mm, the inner diameter is 12.7mm)Water for Machine
5Water tank (preferably about 2m³)Storing machine water
6Circuit breaker and wires (requires an air circuit breaker above 100A, wires and copper wire lugs from the air circuit breaker to the machine air circuit breaker, specifications (4x25mm²+1x16mm² copper cable), the machine provides its own air circuit breaker.Machine motor is 30KW
Cutting table motor is 3.75KW