Description
500-20-0159 Collet Waterjet Consumables
| IMAGE | SKU | NAME | ||
|---|---|---|---|---|
 | 5109111 | Autoline Sapphire Orifice 0.011″ | ||
| 05109111 | Autoline Sapphire Orifice 0.011″ | ||
 | 20412569 | Autoline Sapphire Orifice 0.013″ | ||
 | 5109137 | Autoline Sapphire Orifice 0.014″ | ||
| 05109137 | Autoline Sapphire Orifice 0.014″ | ||
 | 10187250N | Backup ring | ||
 | 11111 | Blue Thread Goop, 2 OZ | ||
 | 10188233N | Brass Backup Ring | ||
| 10188233 | Brass Backup Ring | ||
 | 13612 | Button Head Screw | ||
 | 500-20-0158 | Clamp Nut | ||
 | DD-074 | Coil | ||
 | 12276 | Collet | ||
 | 500-20-0159 | Collet | ||
 | EL-49-2 | Cylinder Body | ||
 | SP-49-12 | Cylinder Body | ||
| SP-49-13 | Cylinder Body | ||
 | EL-69-2 | Cylinder Liner | ||
 | SP4-69-175 | Cylinder Liner | ||
 | SP-69-10 | Cylinder Liner | ||
| SP-69-9 | Cylinder Liner | ||
 | PTTC-009 | Datum Block | ||
 | 500-20-0056 | Diamond Orifice 0.010″ | ||
 | 500-20-0057 | Diamond Orifice 0.011″ | ||
 | 500-20-0058 | Diamond Orifice 0.012″ |
Knowledge of waterjet cutting machine and Waterjet Consumables:
How to dispose of the waste generated by the machine?
The waste materials produced during the use of water jet cutting machines are as follows:
1, Water, the water used for cutting flat sinks can be used for a long time, and when removing waste abrasives, it can also be taken out to find a container for storage, and then pumped into the sink for continued use, but if it takes a long time, it is really too dirty It is also recommended to replace it, at this time the water is usually discharged into the sewer
2. Abrasives, abrasive water jet cutting machines will use abrasives, that is, garnet, which are usually disposable substances. After the machine is turned on, it will be mixed with water into the nozzle and then sprayed out for cutting various The material then settles in the cutting platform’s water trough, which is typically cleaned out periodically by the operator.
There are two ways to clean up:
One is the traditional method of manual cleaning, using a shovel to remove it, which is time-consuming and labor-intensive.
Another method is: use an automatic abrasive remover, Win-Win provides this product, this product is very simple and convenient to use, saves time and effort, put the plastic pipe for pumping abrasive into the cutting water tank, and after power on, it will automatically extract the waste in the water tank , this process does not need to discharge the water, and does not affect the normal cutting work. The waste abrasive after cleaning is not recommended to be recycled and reused, because its cutting effect is not ideal. Normally it will be discarded.
3. Replaced waste Waterjet Consumables parts. When some stainless steel parts of the water jet cutting machine are unevenly worn, they can be processed by grinding or other methods, so that they can still be used, but some parts may not be repaired, so they can only be replaced, then replace them. Parts can usually be recycled for disposal.
Win-Win is a waterjet cutting machine, waterjet consumables and waterjet parts supplier, If you want to know Waterjet Consumables waterjet pumps and waterjet cutting machine, contact me please
