Description
10078715 COLLAR,HP,3/8″ water jet fitting
Main parts for SL-IV 50HP pump:
| Item | Product NO. | Product Name | Picture |
| 1 | 05144647 | HP Cylinder |  |
| 2 | 05144688 | Sealing head assembly |  |
| 3 | 05144696 | Sealing head spacer |  |
| 4 | 05144712 | Cylinder liner |  |
| 5 | 05149703 | Seal assembly |  |
| 6 | 05130091 | Hydraulic cartridge |  |
| 7 | 05119151 | Ceramic plunger |  |
| 8 | 05116561 | HP poppet |  |
| 9 | 05116751 | Poppet pin |  |
| 10 | 05144670 | Poppet retainer |  |
Knowledge for waterjet cutting machine and waterjet spare parts.
Dustproofing the cutting platform of water jet cutting machines
Dust-proofing the cutting platform of a water jet fitting water jet cutting machine is critical to ensure safety and cut quality during the cutting process. Here are some common ways to prevent dust:
Enclosed Cutting Chamber: Use an enclosed water jet fitting cutting chamber or cutting box to isolate the cutting area from the outside environment. This method can effectively prevent the slag, dust and spatter generated during the cutting process from spreading to the surrounding environment and keep the working area clean.
Dust-absorbing equipment: Specialized dust-absorbing equipment, such as vacuum cleaners and dust-removal systems, are equipped to absorb and collect the slag and dust generated during the cutting process. These devices are usually connected to the water jet fitting cutting machine and suck up the slag and dust directly through pipes water jet fitting or vacuum nozzles to minimize their diffusion in the air.
Water Sprinkler Systems: Water sprinkler systems are installed around the cutting area or on the cutting platform to control the dust and slag generated during the cutting process. Water spraying reduces the suspension of dust in the cutting area and reduces its diffusion into the air. In addition, water showers can serve to cool and clean the cutting area.
Guards and baffles: Appropriate guards and baffles are installed on the cutting platform to block the splashing of slag and spatter. These guards reduce the spread of waste slag and dust and provide additional safety protection against operator injury from splashes during the cutting process.
Regular cleaning: Regularly clean the cutting platform and surrounding area to promptly remove accumulated slag and dust. This reduces the accumulation of slag and dust, reduces the risk of its re-spreading, and keeps the work area clean and safe.
When selecting and using dust control methods, suitable dust control measures should be determined based on the specific cutting machine water jet fitting and working conditions. In addition, operators should always follow relevant safety procedures and personal protection requirements to ensure their safety and health.
If you are interested in any waterjet products from Win-Win Water Jet Supplier, contact me please.
The below video shows our new order for two SL-VI (50HP) intensifier pump 60000 psi waterjet in testing, packaging to shipped:
