Description
05148853 TUBE HP 3/8″ BENT SLIV FD water jet fitting
Main parts for SL-IV 50HP pump:
| Item | Product NO. | Product Name | Picture |
| 1 | 05144647 | HP Cylinder |  |
| 2 | 05144688 | Sealing head assembly |  |
| 3 | 05144696 | Sealing head spacer |  |
| 4 | 05144712 | Cylinder liner |  |
| 5 | 05149703 | Seal assembly |  |
| 6 | 05130091 | Hydraulic cartridge |  |
| 7 | 05119151 | Ceramic plunger |  |
| 8 | 05116561 | HP poppet |  |
| 9 | 05116751 | Poppet pin |  |
| 10 | 05144670 | Poppet retainer |  |
Knowledge for waterjet cutting machine and waterjet spare parts.
Does an increase in the flow rate of a water jet cutting machine have an effect on the damage to the material being cut?
Yes, increased flow rates on water jet fitting water jet cutting machines may have an effect on damage to the material being cut. While increased flow rates can improve cutting efficiency, excessive flow rates may lead to the following problems:
Excessive Impact: Increasing the flow rate of a water jet fitting water jet increases the impact force, and if the impact force is too high, it may cause the material in the cutting area to flake, break or be damaged. Particularly with certain brittle or thin sheet materials, excessive flow rates may cause cracking or fracturing.
Increased heat-affected zone: When water jet fitting waterjet cutting, the cooling effect of the water flow reduces the heat-affected zone, which is the area where heat causes a change in material properties. However, a flow rate that is too high may not adequately cool the cut area, resulting in an enlarged heat-affected zone where the material perimeter may become more fragile or deteriorate.
Scrap nuisance: Increasing the flow rate enhances the scouring force on the scrap and cutting residue, but if the flow rate is too high, it may result in a buildup of scrap in the cutting area or ineffective removal, thus affecting the quality of the cut.
Therefore, when selecting the flow rate of a water jet fitting water jet cutting machine, factors such as the nature of the material to be cut, its thickness and the required cutting quality need to be considered. An appropriate flow rate can balance the relationship between cutting efficiency and material damage to obtain the best cutting results. In practice, trials and adjustments are usually required to find the right flow rate value that is best suited for a particular application.
If you are interested in any waterjet products from Win-Win Water Jet Supplier, contact me please.
The below video shows our new order for two SL-VI (50HP) intensifier pump 60000 psi waterjet in testing, packaging to shipped:
