Description

Parts for Water Pumps: O-Ring, 1.69 X 1.88 X .09 10146082

The O-ring, 1.69 X 1.88 X .09 is a specific size of O-ring that is commonly used in high-pressure waterjet pumps, including those that operate at 90,000 psi.

O-rings are a type of mechanical seal that is used to prevent leaks and maintain pressure in hydraulic systems, including those found in waterjet pumps.

Intensifier Assembly 72170165

Item	Part Number	Description	Quantity	Item	Part Number	Description	Quantity
1	05146592	Gasket, Topworks Support	2	14	72162253	Plunger	2
2	20476377	Support, Topworks	2	15	05130091	Hydraulic Seal Cartridge	2
3	10118206	O-Ring, 1.31×1.56× .13	2	16	72175989	Bushing Retainer Flange	2
4	05144514	Hydraulic Cylinder	1	17	72158494	UHP Seal Assembly	2
5	05098991	Socket Head Screw, 3/8-16×3-3/4	8	18	72166738	UHP Cylinder	2
6	95688743	Lock Washer, .38	8	19	72163802	Liner	2
7	72101190	Piston Assembly	1	20	20474325	Stud, 1-1/8-12×18.31	8
8	10074771	O-Ring, 5.25×5.50× .13	2	21	72170157	Sealing Head Assembly	2
9	05120092	Backup Ring, 5.25×5.50× .13	2	22	72178493	Flange Assembly	2
10	72175997	Hydraulic Cylinder Head	2	23	20464590	Flat Washer, 1.13	8
11	05097886	Socket Head Screw, 3/4-16×2-1/4	12	24	20461761	Hex Nut, 1-1/8-12	8
12	05144183	Spacer Assembly, Proximity Switch	2	25	20489339	Adapter, JIC/Pipe, 50× .38	1
	05144191	O-Ring, .69× .88× .09		26	72176756	O-Ring, 3.88×4.25× .19	6
13	72141569	Kit, Proximity Switch	2
	72134224	Proximity Switch
	95119012	Socket Head Screw, 1/4-20×1

Parts for Water Pumps 10146082 O-Ring, 1.69-x-1.88-x-.09 — Parts for Water Pumps 10146082 O-Ring, 1.69 X 1.88 X .09

Here are some general characteristics of the O-ring, 1.69 X 1.88 X .09 used in 90,000 psi waterjet pumps:

1. Material composition

O-rings used in high-pressure waterjet pumps are typically made from synthetic rubber materials that can withstand the high pressures and temperatures of the pump.

Common materials include nitrile rubber, EPDM, and Viton.

2. Size and dimensions

The O-ring, 1.69 X 1.88 X .09 has a specific size and dimension, with an inner diameter of 1.69 inches, an outer diameter of 1.88 inches, and a thickness of 0.09 inches.

This size is designed to fit specific components of the waterjet pump, such as the manifold or cylinder.

3. Pressure rating

O-rings used in 90,000 psi waterjet pumps need to be able to withstand the high pressure of the water and hydraulic fluid in the pump.

The pressure rating of an O-ring refers to the maximum pressure it can withstand without leaking or failing.

4. Temperature range

O-rings used in high-pressure waterjet pumps also need to be able to withstand a wide range of temperatures, including both high and low temperatures.

The temperature range of an O-ring refers to the range of temperatures it can withstand without degrading or losing its sealing properties.

5. Chemical resistance

O-rings used in 90,000 psi waterjet pumps may also need to resist exposure to various chemicals or fluids, such as hydraulic oil or water.

The chemical resistance of an O-ring refers to its ability to resist degradation or damage from exposure to specific chemicals or fluids.

6. Installation and removal

O-rings used in 90,000 psi waterjet pumps should be installed and removed using proper techniques and tools to prevent damage or distortion.

It’s important to follow the manufacturer’s recommended installation and removal procedures to ensure optimal performance and prevent leaks or other issues.

7. Storage and handling

O-rings used in 90,000 psi waterjet pumps should be stored and handled carefully to prevent damage or contamination.

It’s important to store O-rings in a cool, dry place away from direct sunlight and exposure to chemicals or other substances.

8. Compatibility

O-rings should be compatible with the specific fluids or chemicals used in the pump, as well as with the materials of the pump components.