Do you want an intensifier pump with higher efficiency at an affordable price?
Then Win-Win’s WW60JET is a good choice. It’s a kind of waterjet pump that equipped with double intensifiers developed by Win-Win which is popular by the majority of users. It has sold more than 100 units since it passed the test in 2020 and went on the market. It can The maximum cutting pressure achieved is 60,000psi/420mpa/4200bar.

The Features of WW0JET Pump:
1, First, the dual intensifiers design with two conversion types, you can choose the way you want:
A. The two intensifiers work together, so the maximum flow can reach 6.5L/min, so it can drive multiple cutting heads to cut at the same time, and can drive up to 4 cutting heads with 0.17mm orifice at one time, which is very suitable for car interior cutting, food cutting. It can also drive two cutting heads with 0.25mm orifice at one time, which is suitable for glass cutting. It can also drive a cutting head with 0.35mm orifice, so it has high cutting efficiency, it can cut various metals from 1-200mm, and the cutting efficiency is 10- 20% higher than normal 3.7L/min one
B, The two intensifiers work separately: that is, when one intensifier is in maintenance, we can switch to the other one for cutting operations, so that production will not be delayed, which will benefit the production of the factory

Marque

GAGNANT-GAGNANT

Modèle

WW60JET

Capacité atténuatrice

2L

Mode de conduite

Moteur haute performance

Tension

380V

Application

Système de découpe au jet d’eau

Puissance nominale

60HP

Débit d’eau maximal

6,5 L/min

Pression de service

420Mpa

Pression de service continue

320Mpa-380Mpa

Orifices de conduite Qté.

1-4

Température

5-40°C

Type d’huile hydraulique

Huile anti-usure No.46

Méthode de refroidissement

Cool-heat exchanger

Taille (L * w * h)

1.7m*1.1m*1.4m

Poids

1.5T

Equipped with an international general-purpose intensifier. We have very detailed and standardized instructions for users, and you can find its related maintenance operation video introduction on many websites, and its intensifier parts is a classic model universally used in the world, the price is reasonable and affordable, and you don’t have to worry about it being difficult to buy the parts, so you can use it with confidence when you buy this intensifier pump, without any worries

2-liter accumulator. The larger the capacity of the accumulator, the smaller the fluctuation during cutting, and this accumulator is our innovative technology with patent certificate. The rubber seal in the accumulator adopts a hard seal, and also cancels the cumbersome structure of the pull rod and check valve body. This is a simple and durable accumulator, and it is maintenance-free.
So labor costs and maintenance costs can be saved.

There are buttons and signal lights on the upper right side of the pump, such as start button, shutdown button, emergency stop button, high and low pressure regulating valve, etc., which are convenient for pressure adjustment and have obvious markings, which are clear at a glance and easy to operate