Precautions regarding the distance of the waterjet tools cutting head from the workpiece, cutting speed, etc.?

When cutting with a waterjet tools water jet cutting machine, factors such as the distance of the cutting head from the workpiece and cutting speed have a significant impact on cutting efficiency and quality. The following are some precautions: Distance between waterjet tools cutting head and workpiece: The distance between waterjet tools cutting head and workpiece needs to be adjusted according to the material and requirements of cutting.

Generally speaking, the distance between the waterjet tools cutting head and the cutting workpiece is smaller, and the cutting speed will be faster.

If the distance is too small, it will produce a larger heat-affected zone and a larger cutting width; if the distance is too large, the cutting speed will be slower and the cutting quality will be reduced. Therefore, the distance between the two still needs to be set according to the actual cutting situation. Cutting speed: The cutting speed needs to be adjusted according to the cutting material and requirements.

Generally speaking, the faster the cutting speed, the higher the cutting efficiency, but it will also affect the cutting quality. However, if the cutting speed is too fast, the loss of the cut parts will be accelerated, and if the cutting speed is too slow, the cutting efficiency cannot keep up. Therefore, it is necessary to make reasonable adjustments based on the actual situation.

Cutting Angle: The cutting angle will also affect the cutting efficiency and quality.

Generally speaking, the smaller the cutting angle, the higher the cutting efficiency, but it will also affect the cutting quality. If the angle is too small, it will increase the wear of the waterjet tools cutting head and affect the cutting quality; if the angle is too large, it will affect the cutting efficiency. Therefore, it is necessary to determine the appropriate cutting angle according to the actual situation. In short, the distance between the cutting head and the workpiece, cutting speed, cutting angle and other factors will affect the effect of water jet cutting, need to be adjusted and determined according to the actual situation, in order to improve the cutting quality and efficiency.