10078608 Presse-étoupe HP .56 Outils à jet d’eau

Catégories: , Étiquette:

Description

Waterjet Tools: HP gland

Item number: 10078608

Details: used on the sl-vi 100hp waterjet intensifier cutting machine tool

Apparenté waterjet tools:
Numéro d’articleDescription
80078330Support d’outil de retrait de joint
10079986Strap wrench
10081370Spanner wrench
05053871Combination wrench
10084440Pure goop
FAQ of platform waterjet machine etc.:

What waterjet tools will be used on the waterjet cutting machine?

HP plug .38 waterjet tools: 10079523
Hex driver waterjet tools: 05103957
Socket wrench waterjet tools: 80078249

What speed does a waterjet cut aluminum?

The cutting speed of a water jet when cutting aluminum can vary depending on a number of factors including the thickness of the aluminum being cut, the power of the water jet, and the type of nozzle being used.The following data comes from the test of a booster pump with a pressure of 60Kpsi. When cutting an aluminum plate of about 5mm, the cutting speed with a 0.18mm waterjet orifice is about 15 inches per minute; if it is used with a 0.35mm waterjet orifice, the cutting speed is about 1 40 inches per minute or so. Of course, the test data is for reference only, because the abrasive supply and the pressure of the booster pump can be adjusted according to requirements..In general, water jets can cut through aluminum at speeds ranging from 100 inches per minute (IPM) for thinner aluminum sheets, up to 30 IPM for thicker aluminum plates. However, it’s important to note that the cutting speed can also be affected by the desired cutting quality, with more precise cuts requiring slower cutting speeds.It’s also worth noting that the cutting speed of a water jet can be adjusted during the cutting process to achieve the desired result. This can be particularly useful when cutting through thicker aluminum, as slower cutting speeds may be required to ensure a clean and accurate cut.