Description
500-15-0100 INSR-CBD,.295 X 0.030 X 3.00″ (PG), 500-15-0102 INSR-CBD,.295 X 0.040 X 3.00″ (PG) Waterjet Shop Waterjet Shop
| IMAGE | SKU | NOM | ||
|---|---|---|---|---|
 | 80086622 | Hydraulic Cartridge Seal Assembly | ||
 | 5049689 | Hydraulic Oil Filter | ||
| 05049689 | Hydraulic Oil Filter | ||
 | 10107894 | Inlet Poppet Check Valve | ||
 | 500-15-0100 | INSR-CBD,.295 X 0.030 X 3.00″ (PG) | ||
 | 500-15-0102 | INSR-CBD,.295 X 0.040 X 3.00″ (PG) | ||
 | 501-1-0010 | Internal circlip | ||
 | EL-72 | LP Check Valve Housing | ||
 | SP-72-6 | LP Check Valve Housing | ||
 | SP-72-7 | LP Check Valve Housing | ||
 | SP-73-2 | LP Check Valve Poppet | ||
 | 500-12-0040 | LP Check Valve Spring | ||
 | WJ0C1016 | Mini Whipline | ||
 | 12747 | Mixing Chamber | ||
 | 11328 | Needle and Seat Normally Closed Kit | ||
 | 12862 | Nozzle Nut | ||
 | 20462745 | Nozzle Tube – PAC | ||
 | 10138410 | Nozzle Tube 0.38″ x 5.0″ | ||
 | 500-20-0011 | NOZZLE TUBE 119MM | ||
 | 13839 | Nozzle Tube Assy 230mm | ||
 | 13730 | Nozzle Tube Assy PAC 162mm | ||
 | 500-5-0042 | O-Ring BS-033 | ||
 | 500-19-0057 | Oil Filter 19 Micron | ||
 | 500-19-0053 | Oil Filter 24 Micron | ||
 | 500-19-0056 | Oil Filter 4 Micron |
Knowledge of waterjet cutting machine and spare parts of waterjet shop:
What do I need to pay attention to when replacing the nozzles of my water jet cutting machine?
1, turn off the water jet cutting machine waterjet shop: to ensure the safety of the operator, we must turn off the machine before replacing the nozzle.
2, waterjet shop nozzle selection: we know that there are various sizes and types of nozzles, we must choose the right nozzle for our machine and cutting requirements.
3, clean up the work area: we need to keep the operating area clean and tidy before doing any repairs to the water jet cutting machine.
4, waterjet shop dismantle the old nozzle: dismantle the nozzle taking care not to damage other corresponding parts
5, install the new nozzle: follow the instructions or the manufacturer’s guidance on the correct steps to replace the nozzle
6, adjust the nozzle: adjust and fix the nozzle
7, start the water jet cutting machine: start the machine to test the nozzle working condition, whether everything is good and put into production.
8, the old parts also need to be saved, and record management, so as to know the life of the parts.
Win-Win is a waterjet shop for waterjet cutting machine and waterjet parts, If you need any waterjet procucts, Contactez-moi s’il vous plaît
The following is Win-Win waterjet shop display.
