Description

Waterjet cutting parts 72146433 proximity switch

Installation: installed on the waterjet pump, connect with the hydraulic cylinder and the solenoid valve

This proximity switch is connected to the oil cylinder. There are usually two sensors on a waterjet intensifier pump, which are used to receive signals and control the reversing of the piston to achieve the supercharging effect.

There are also type’s water jet sensor which is a component used to detect and control parameters such as water pressure, water level, and temperature in water jet equipment.

Generally, there are the following types: Liquid level sensor: It is used to detect the liquid level of the water tank or oil tank. It is divided into contact type and non-contact type. The common ones are float type, capacitive type, ultrasonic type, etc.

Pressure sensor: It is used to detect the pressure of high-pressure water pipes or oil cylinders. It is divided into piezoresistive, piezoelectric, strain gauge, etc. The common ones are pressure switches, pressure gauges, etc.

Temperature sensor: used to detect water temperature or oil temperature, divided into thermocouples, thermistors, thermal resistors, etc. Common ones include temperature switches, thermometers, etc.

Optical sensor: used to detect the position and motion state of the waterjet head, using the photoconductive effect or photovoltaic effect of semiconductor components such as photodiodes and phototransistors.

The precautions for waterjet sensors are as follows: Select the appropriate sensor type and specification, and select a sensor that can meet performance indicators such as accuracy, stability, reliability, and durability according to the working conditions and requirements of the waterjet equipment. Install the correct position and direction of the sensor. According to the working principle and instructions of the sensor, choose the appropriate installation position and direction to avoid interference or damage. Connect the correct sensor line and power supply, according to the sensor’s electrical parameters and wiring diagram, connect the correct line and power supply to avoid short circuit or overload. Maintain regular sensor inspection and cleaning, according to the use environment and frequency of use of the sensor, regularly check and clean the sensor to keep it in good working condition.

You can find maby different brands of waterjet cutting parts on our website, if you have question, please leave us a message!