Description

Waterjet cutting nozzle used on the abrasive waterjet cutting head assembly

The following are some of our waterjet cutting nozzle sizes for your reference:

7.14×0.76×76.2mm

7.14×1.02×76.2mm

7.14×0.6×101.6mm

7.14×0.76×101.6mm

7.14×1.02×101.6mm

7.14×0.84×76.2mm

7.14×0.89×76.2mm

7.14×0.91×76.2mm

7.14×1.2×76.2mm

We can accept customized production of the waterjet cutting nozzle, as long as you provide the size you want, we can customize them for you, usually the minimum order quantity is about five pieces. Regarding the water jet nozzles, which are water cutting consumables, to order more at one time It is also a good way to save transportation costs for cross-border transportation by preparing few nozzles.

FAQ of the waterjet cutting machine – Why do I have to replace my waterjet nozzle with a new one after a short period of use?

The quality of waterjet sand is not good, and it contains too much dust, soil, impurities, etc., which may easily cause blockage or corrosion of the sand pipe.
The particle size of the waterjet sand is not suitable, too large or too small particles will affect the cutting effect and the life of the sand tube.
Waterjet sand is not hard enough to effectively cut hard materials, resulting in slow cutting speeds and abrasive tube wear.
The service life of the waterjet nozzle is too long, resulting in the deflection or lateral deviation of the water column, which directly hits the inner wall of the sand tube, causing the emission phenomenon