Description

WJ055004/320 Cylinder Bleed Down Valve Actuator Waterjet Cutting Machine Part

What kind of materials can UHP water jet cutters cut?
UHP water jet cutting machine can cut all kinds of thick and hard materials: stainless steel, aluminum, copper, steel, marble, alloy metal, glass, plastic, ceramic, tile and all kinds of visible materials.
What is the accuracy that can be achieved by water jet cutting machine Waterjet Cutting Machine Part?
The accuracy of the cut workpiece is between 0.1mm and 0.25mm. The accuracy of the workpiece is determined by the accuracy of the machine, the size and thickness of the workpiece being cut.
How wide is the cutting gap of the water jet cutting machine?
Depends on the size and thickness of the material to be cut and the Waterjet Cutting Machine Part nozzle used. Generally speaking, the kerf for abrasive cutting is about 1.0mm to 1.2mm, and as the diameter of the Waterjet Cutting Machine Part nozzle/Waterjet Cutting Machine Part mixing tube flares, the kerf becomes larger.
What kind of bevel edge will be produced by waterjet cutting?
The speed at which the cut is made determines the quality of the beveled edge. Most of the good quality cuts seen are around 0.1mm on one side.
What kind of materials should be cut with a water jet cutting machine?
Generally speaking, materials with complex patterns, thick, difficult to cut, fragile and heat-shy materials are most suitable for waterjet cutting.
How does waterjet cutting compare to laser cutting?
Laser cutting is a manufacturing method that increases productivity and certainly has its uses. Waterjets do outperform lasers in certain areas:
… a. No limitation of cutting thickness
b. Reflective materials such as brass and aluminum can be cut
c. No heat input, so it will not burn or produce thermal effects
d. When you change the cutting material, the only thing you need to change is the cutting speed; you do not need to change the gas, focus or other objects
e. More Waterjet Cutting Machine Part cutting heads can be easily installed to increase capacity
f. Laser equipment is more specialized and difficult to maintain
g. You can have a complete waterjet machine for 1/2 to 1/3 of the price of a laser machine.
How does waterjet cutting compare with wire cutting?
Wire cutting is very precise but very slow, it requires a conductive material and generates heat.
How does waterjet cutting compare to milling?
If you are cutting the periphery of a part and drilling holes, instead of using blind holes, drilling and threading, you can choose a faster, easier to arrange and cheaper abrasive cutter. The main reason for this is that we can cut the workpiece in a single pass without having to grind all the metal to pieces. When high precision workpieces need to be cut, the abrasive cutter is a tooling machine that can be used to produce a near finished product in a single pass with no thermal effects. In addition, the scrap produced by the abrasive cutter is usually valuable because it is in the form of whole pieces rather than chips, and can be reused.