Description
Pièces de cellule de jet d’eau de robot
Item number: 304296 Coil Axis 2
Details: used on the ABB robot arms, robotic waterjet cutting workstation
Apparenté pièces de cellule de jet d’eau de robot:
Robotic waterjet cutting system: Yaskawa robotic waterjet workstation, Dual Fanuc robotic waterjet workstation, ABB robotic waterjet workstation
FAQ of platform waterjet machine & robot waterjet system & pièces de cellule de jet d’eau de robot:
Reasons and Solutions of Leakage of robot waterjet cell parts Outlet Body of Waterjet Intensifier Pump
The reasons and solutions for the water leakage of the robot waterjet cell parts outlet body of the waterjet intensifier pump can be explained in more detail as follows:
- Damaged Seals
The seals of the robot waterjet cell parts outlet body of the waterjet intensifier pump may be worn or aged during use, resulting in reduced sealing performance and water leakage. Replacing with new seals is an effective way to solve this problem. Appropriate seal materials and specifications can be selected to ensure its fit and sealing performance with the check valve body.
- Unstable Oil Pressure
Fluctuations in the oil pressure inside the intensifier pump may cause water leakage from the robot waterjet cell parts outlet body. This could be due to a clogged or worn intensifier pump, resulting in unstable oil pressure. The solution is to check whether the intensifier pump is working properly and repair or replace it if necessary. At the same time, you can also consider adding an oil pressure stabilization device to keep the oil pressure inside the intensifier pump stable.
- Cleaning
During long-term use, impurities may accumulate in the pipeline, resulting in a decrease in sealing performance, which is also one of the reasons for the leakage of the outlet body. Regular cleaning can remove impurities in the pipeline, keep the inside of the pipeline clean and improve the sealing performance. A simple wash before each use and regular thorough washes and waxes are recommended.
- Wear of The High-Pressure Tube
High-pressure tube wear causes water leakage. Or there is a problem with the connection between the high-pressure tube and the outlet body that causes the water to leak.
- Other Reasons
In addition to the above reasons, the leakage of the outlet body may also be related to improper product design, manufacture or installation. If the above solutions cannot solve the problem, it is recommended to contact a professional for inspection and repair, or contact the manufacturer for technical support.
