Description

The 20452965 Waterjet 0.38 Collar 90k is a component used in ultra high pressure jet pump.

It is 0.38 inches in diameter and is typically installed between the plunger and the gland nut, providing additional support and stability to the plunger assembly.

The collar may be held in place by a set screw or other fastener.

The collar is typically made of high-strength materials like stainless steel or titanium, to withstand the extreme pressures and temperatures involved in waterjet cutting applications.

The 20452965 Waterjet 0.38 Collar 90k is designed to be used with a specific type of plunger or intensifier assembly and may not be compatible with other components or waterjet pump models.

It is critical to use parts recommended by us to avoid compatibility issues.

What are common issues that can occur if the collar is not inspected regularly?

If the Waterjet 0.38 Collar 90k used in ultra high pressure jet pump is not inspected and maintained regularly, several issues can arise that can affect the performance and reliability of the pump.

1. Leaks

If the collar becomes worn or damaged, it may not provide a proper seal between the plunger and the intensifier body, which can cause water or abrasive to leak from the ultra high pressure jet pump.

Leaks can lead to reduced cutting performance, damage to the pump, or other issues.

2. Damage to other components

If the collar is not functioning properly, it may cause damage to other parts in the ultra high pressure jet pump.

For example, if there are leaks due to a worn or damaged collar, the abrasive may cause damage to other components, such as the intensifier body or plunger, which can be costly to repair or replace.

3. Reduced lifespan

If the collar is not properly maintained, it can wear out faster than expected, which can reduce the overall lifespan of the ultra high pressure jet pump.

This can lead to the need for more frequent repairs or replacement of the pump, which can be expensive.

4. Contamination

If the Waterjet 0.38 Collar 90k is not inspected regularly, it can become contaminated with debris, abrasive, or other materials.

This can lead to blockages or damage to the collar, which can affect the performance of the ultra high pressure jet pump.

5. Unplanned downtime

If the pump experiences unexpected issues due to a worn or damaged collar, it may require unplanned downtime for repairs or replacement.

This can impact productivity and profitability, especially if the downtime occurs during critical production periods.

6. Inaccurate cuts

If the Waterjet 0.38 Collar 90k is not functioning properly, it can affect the accuracy of cuts.

This can lead to wasted material, increased operating costs, and reduced your customer satisfaction.

7. Difficulty in maintenance

If the collar is not inspected and maintained regularly, it can become difficult to remove during maintenance or repair tasks.

This can make it challenging to replace the collar or other components, which can increase the time and cost of repairs.

To prevent these issues, it is important to follow our recommendations for inspection and maintenance of the Waterjet 0.38 Collar 90k and the ultra high pressure jet pump.

Regular inspection and maintenance can help identify any issues early on and prevent them from escalating into more significant problems.

In addition, following proper operational procedures, such as using the correct abrasive type and maintaining appropriate water pressure and temperature, can also help prolong the life of the pump and prevent issues from arising.

Any other questions, please consult with us.