Description

Parts for Water Pumps: O-Ring, 1.69 X 1.88 X .09 10146082

The O-ring, 1.69 X 1.88 X .09 is a specific size of O-ring that is commonly used in high-pressure waterjet pumps, including those that operate at 90,000 psi.

O-rings are a type of mechanical seal that is used to prevent leaks and maintain pressure in hydraulic systems, including those found in waterjet pumps.

Assemblage de l’intensificateur 72170165

Article	Numéro de pièce	Description	Quantité	Article	Numéro de pièce	Description	Quantité
1	05146592	Joint d’étanchéité, Topworks Support	2	14	72162253	Ventouse	2
2	20476377	Soutien, Topworks	2	15	05130091	Cartouche de joint hydraulique	2
3	10118206	Joint torique, 1.31×1.56× .13	2	16	72175989	Bride de retenue de bague	2
4	05144514	Vérin hydraulique	1	17	72158494	Assemblage de joints UHP	2
5	05098991	Vis à tête creuse, 3/8-16×3-3/4	8	18	72166738	Cylindre UHP	2
6	95688743	Rondelle de blocage, .38	8	19	72163802	Paquebot	2
7	72101190	Assemblage du piston	1	20	20474325	Goujon, 1-1/8-12×18.31	8
8	10074771	Joint torique, 5.25×5.50× .13	2	21	72170157	Assemblage de la tête de scellage	2
9	05120092	Anneau de secours, 5.25×5.50× .13	2	22	72178493	Assemblage de brides	2
10	72175997	Culasse hydraulique	2	23	20464590	Rondelle plate, 1.13	8
11	05097886	Vis à tête creuse, 3/4-16×2-1/4	12	24	20461761	Écrou hexagonal, 1-1/8-12	8
12	05144183	Ensemble d’entretoise, interrupteur de proximité	2	25	20489339	Adaptateur, JIC/Tuyau, 50× .38	1
	05144191	Joint torique, .69× .88× .09		26	72176756	Joint torique, 3,88×4,25× .19	6
13	72141569	Kit, Détecteur de proximité	2
	72134224	Commutateur de proximité
	95119012	Vis à tête creuse, 1/4-20×1

Parts for Water Pumps 10146082 O-Ring, 1.69-x-1.88-x-.09 — Parts for Water Pumps 10146082 O-Ring, 1.69 X 1.88 X .09

Here are some general characteristics of the O-ring, 1.69 X 1.88 X .09 used in 90,000 psi waterjet pumps:

1. Material composition

O-rings used in high-pressure waterjet pumps are typically made from synthetic rubber materials that can withstand the high pressures and temperatures of the pump.

Common materials include nitrile rubber, EPDM, and Viton.

2. Size and dimensions

The O-ring, 1.69 X 1.88 X .09 has a specific size and dimension, with an inner diameter of 1.69 inches, an outer diameter of 1.88 inches, and a thickness of 0.09 inches.

This size is designed to fit specific components of the waterjet pump, such as the manifold or cylinder.

3. Pressure rating

O-rings used in 90,000 psi waterjet pumps need to be able to withstand the high pressure of the water and hydraulic fluid in the pump.

The pressure rating of an O-ring refers to the maximum pressure it can withstand without leaking or failing.

4. Temperature range

O-rings used in high-pressure waterjet pumps also need to be able to withstand a wide range of temperatures, including both high and low temperatures.

The temperature range of an O-ring refers to the range of temperatures it can withstand without degrading or losing its sealing properties.

5. Chemical resistance

O-rings used in 90,000 psi waterjet pumps may also need to resist exposure to various chemicals or fluids, such as hydraulic oil or water.

The chemical resistance of an O-ring refers to its ability to resist degradation or damage from exposure to specific chemicals or fluids.

6. Installation and removal

O-rings used in 90,000 psi waterjet pumps should be installed and removed using proper techniques and tools to prevent damage or distortion.

It’s important to follow the manufacturer’s recommended installation and removal procedures to ensure optimal performance and prevent leaks or other issues.

7. Storage and handling

O-rings used in 90,000 psi waterjet pumps should be stored and handled carefully to prevent damage or contamination.

It’s important to store O-rings in a cool, dry place away from direct sunlight and exposure to chemicals or other substances.

8. Compatibility

O-rings should be compatible with the specific fluids or chemicals used in the pump, as well as with the materials of the pump components.