Description

90K Water Jet Cutting Machine Parts: Tee 20455812

Assemblage de l’intensificateur 72170165

Article	Numéro de pièce	Description	Quantité	Article	Numéro de pièce	Description	Quantité
1	05146592	Joint d’étanchéité, Topworks Support	2	14	72162253	Ventouse	2
2	20476377	Soutien, Topworks	2	15	05130091	Cartouche de joint hydraulique	2
3	10118206	Joint torique, 1.31×1.56× .13	2	16	72175989	Bride de retenue de bague	2
4	05144514	Vérin hydraulique	1	17	72158494	Assemblage de joints UHP	2
5	05098991	Vis à tête creuse, 3/8-16×3-3/4	8	18	72166738	Cylindre UHP	2
6	95688743	Rondelle de blocage, .38	8	19	72163802	Paquebot	2
7	72101190	Assemblage du piston	1	20	20474325	Goujon, 1-1/8-12×18.31	8
8	10074771	Joint torique, 5.25×5.50× .13	2	21	72170157	Assemblage de la tête de scellage	2
9	05120092	Anneau de secours, 5.25×5.50× .13	2	22	72178493	Assemblage de brides	2
10	72175997	Culasse hydraulique	2	23	20464590	Rondelle plate, 1.13	8
11	05097886	Vis à tête creuse, 3/4-16×2-1/4	12	24	20461761	Écrou hexagonal, 1-1/8-12	8
12	05144183	Ensemble d’entretoise, interrupteur de proximité	2	25	20489339	Adaptateur, JIC/Tuyau, 50× .38	1
	05144191	Joint torique, .69× .88× .09		26	72176756	Joint torique, 3,88×4,25× .19	6
13	72141569	Kit, Détecteur de proximité	2
	72134224	Commutateur de proximité
	95119012	Vis à tête creuse, 1/4-20×1

A Tee is one of water jet cutting machine parts that is commonly used in 90k intensifier pumps.

The Tee fitting gets its name from its T-shaped cross-section, which has one input and two outputs.

In a waterjet pump, Tees may be used to split the flow of water between two different water jet cutting machine parts, such as the pump and the cutting head.

They may also be used to combine the flow from two different sources, or to change the direction of flow within the system.

The specific design and specifications of the Tee used in a 90k waterjet pump may vary depending on the manufacturer and model of the pump, as well as the specific application within the system.

Factors such as the diameter, wall thickness, and material of the Tee may be optimized for maximum efficiency and reliability in the particular application.

Tees are made from various materials, containing metals like stainless steel or brass, or plastics like PVC or polypropylene.

The choice of material depends on factors such as the pressure and temperature of the system, as well as the presence of any corrosive or abrasive substances in the fluid being pumped.

Proper installation of the Tee fitting is important to ensure the safe and efficient operation of the waterjet pump.

The Tee fitting should be installed in the correct orientation, with the input and output branches aligned properly with the flow of water through the system.

The fitting should be securely fastened using appropriate hardware, such as bolts or clamps.