Description
90k psi Pump Spare Parts: Sealing Head Assembly 72170157
The sealing head assembly is an important component of a 90k psi pump, which is used to seal the high-pressure water within the intensifier.
The sealing head assembly helps to prevent leaks and maintain the high pressure required for waterjet cutting.
The sealing head assembly typically consists of several components, including the plunger, packing, seal housing, and gland.
The plunger is a cylindrical component that moves back and forth within the intensifier, creating the high-pressure water.
The packing, which is typically made from a composite material, surrounds the plunger and helps to create a seal between the plunger and the seal housing.
The seal housing, which is typically made from stainless steel or a similar material, provides a stable surface for the packing to seal against.
The gland is used to compress the packing and create a tight seal.
Article | Numéro de pièce | Description | Quantité | Article | Numéro de pièce | Description | Quantité |
1 | 05146592 | Joint d’étanchéité, Topworks Support | 2 | 14 | 72162253 | Ventouse | 2 |
2 | 20476377 | Soutien, Topworks | 2 | 15 | 05130091 | Cartouche de joint hydraulique | 2 |
3 | 10118206 | Joint torique, 1.31×1.56× .13 | 2 | 16 | 72175989 | Bride de retenue de bague | 2 |
4 | 05144514 | Vérin hydraulique | 1 | 17 | 72158494 | Assemblage de joints UHP | 2 |
5 | 05098991 | Vis à tête creuse, 3/8-16×3-3/4 | 8 | 18 | 72166738 | Cylindre UHP | 2 |
6 | 95688743 | Rondelle de blocage, .38 | 8 | 19 | 72163802 | Paquebot | 2 |
7 | 72101190 | Assemblage du piston | 1 | 20 | 20474325 | Goujon, 1-1/8-12×18.31 | 8 |
8 | 10074771 | Joint torique, 5.25×5.50× .13 | 2 | 21 | 72170157 | Assemblage de la tête de scellage | 2 |
9 | 05120092 | Anneau de secours, 5.25×5.50× .13 | 2 | 22 | 72178493 | Assemblage de brides | 2 |
10 | 72175997 | Culasse hydraulique | 2 | 23 | 20464590 | Rondelle plate, 1.13 | 8 |
11 | 05097886 | Vis à tête creuse, 3/4-16×2-1/4 | 12 | 24 | 20461761 | Écrou hexagonal, 1-1/8-12 | 8 |
12 | 05144183 | Ensemble d’entretoise, interrupteur de proximité | 2 | 25 | 20489339 | Adaptateur, JIC/Tuyau, 50× .38 | 1 |
05144191 | Joint torique, .69× .88× .09 | 26 | 72176756 | Joint torique, 3,88×4,25× .19 | 6 | ||
13 | 72141569 | Kit, Détecteur de proximité | 2 | ||||
| 72134224 | Commutateur de proximité | ||||||
95119012 | Vis à tête creuse, 1/4-20×1 |
What are some common issues that can arise with the sealing head assembly on a 90k psi pump？
1. Leaks
Leaks in the sealing head assembly can occur due to several reasons, including worn or damaged packing, improper installation or compression of the packing, or damage to the seal housing or other components of the sealing head assembly.
Leaks can lead to reduced system efficiency, increased operating costs, and potential safety hazards such as slipping or electrical hazards.
2. Wear and tear
The packing and other components of the sealing head assembly can wear or become damaged due to the high-pressure water flow and repetitive motion of the plunger. This can lead to reduced system efficiency, increased operating costs, and potential safety hazards such as system failure or leaks.
3. Misalignment
Misalignment of the sealing head assembly and other system components can cause wear or damage over time. This can lead to reduced 90k psi pump system efficiency, increased operating costs, and potential safety hazards such as system failure or leaks.
4. Corrosion
Corrosion can occur if the sealing head assembly or other 90k psi pump system components are not properly protected from the fluids used in waterjet cutting. Corrosion can weaken the sealing head assembly and cause it to fail, which can lead to system damage or failure, and potential safety hazards if the system is under high pressure.
5. Improper maintenance
Improper maintenance or installation of the sealing head assembly can lead to issues such as leaks, wear and tear, and misalignment. Proper maintenance and installation procedures should be followed to ensure safe and reliable operation of the 90k psi pump system.
What are the common causes of failure for the sealing head assembly on a 90k psi pump？
1. Leaks
Leaks in the sealing head assembly can occur due to several reasons, including worn or damaged packing, improper installation or compression of the packing, or damage to the seal housing or other components of the sealing head assembly.
Leaks can lead to reduced system efficiency, increased operating costs, and potential safety hazards such as slipping or electrical hazards.
2. Wear and tear
The packing and other components of the sealing head assembly can wear or become damaged due to the high-pressure water flow and repetitive motion of the plunger.
This can lead to reduced 90k psi pump system efficiency, increased operating costs, and potential safety hazards such as system failure or leaks.
3. Misalignment
Misalignment of the sealing head assembly and other 90k psi pump system components can cause wear or damage over time.
This can lead to reduced system efficiency, increased operating costs, and potential safety hazards such as system failure or leaks.
4. Corrosion
Corrosion can occur if the sealing head assembly or other 90k psi pump system components are not properly protected from the fluids used in waterjet cutting.
Corrosion can weaken the sealing head assembly and cause it to fail, which can lead to system damage or failure, and potential safety hazards if the system is under high pressure.
5. Improper installation
Improper installation of the sealing head assembly can cause it to fail over time. For example, if the packing is not properly compressed, it may fail prematurely due to wear or damage.
Similarly, if the components are not properly aligned, it can cause uneven wear and damage to the assembly.
6. Over-pressurization
If the system is over-pressurized, it can cause the sealing head assembly to fail. For example, if the pressure relief valve fails or is not properly set, it can cause the system to operate at a higher pressure than it was designed for.
This can cause the packing to fail or other components of the assembly to become damaged.
7. Maintenance issues
Proper maintenance is essential to ensure the safe and reliable operation of the sealing head assembly and the 90k psi pump system as a whole.
Failure to inspect and replace worn or damaged components, failure to properly lubricate the assembly, or failure to follow manufacturer’s recommendations for installation and maintenance can all cause the sealing head assembly to fail over time.
The sealing head assembly is designed to withstand the high pressures and stresses of waterjet cutting, and must be properly maintained to ensure safe and reliable operation of the 90k psi pump system.
This may include regular inspection and replacement of the packing, monitoring of system parameters such as pressure and temperature, and following manufacturer’s recommendations for installation and maintenance.
In summary, proper maintenance and inspection of the sealing head assembly is essential to ensure safe and reliable operation of the 90k psi pump system.
Any other requirements, please Contactez-nous.
