Description

90000 psi Waterjet Pump Spare Parts: 95119012 Socket Head Screw, 1/4-20 x 1

Assemblage de l’intensificateur 72170165

Article	Numéro de pièce	Description	Quantité	Article	Numéro de pièce	Description	Quantité
1	05146592	Joint d’étanchéité, Topworks Support	2	14	72162253	Ventouse	2
2	20476377	Soutien, Topworks	2	15	05130091	Cartouche de joint hydraulique	2
3	10118206	Joint torique, 1.31×1.56× .13	2	16	72175989	Bride de retenue de bague	2
4	05144514	Vérin hydraulique	1	17	72158494	Assemblage de joints UHP	2
5	05098991	Vis à tête creuse, 3/8-16×3-3/4	8	18	72166738	Cylindre UHP	2
6	95688743	Rondelle de blocage, .38	8	19	72163802	Paquebot	2
7	72101190	Assemblage du piston	1	20	20474325	Goujon, 1-1/8-12×18.31	8
8	10074771	Joint torique, 5.25×5.50× .13	2	21	72170157	Assemblage de la tête de scellage	2
9	05120092	Anneau de secours, 5.25×5.50× .13	2	22	72178493	Assemblage de brides	2
10	72175997	Culasse hydraulique	2	23	20464590	Rondelle plate, 1.13	8
11	05097886	Vis à tête creuse, 3/4-16×2-1/4	12	24	20461761	Écrou hexagonal, 1-1/8-12	8
12	05144183	Ensemble d’entretoise, interrupteur de proximité	2	25	20489339	Adaptateur, JIC/Tuyau, 50× .38	1
	05144191	Joint torique, .69× .88× .09		26	72176756	Joint torique, 3,88×4,25× .19	6
13	72141569	Kit, Détecteur de proximité	2
	72134224	Commutateur de proximité
	95119012	Vis à tête creuse, 1/4-20×1

The Socket Head Screw 95119012 is a specific type of fastener that has a cylindrical head with a hexagonal socket drive in the head.

This type of screw is also commonly referred to as a “Allen screw” or “hex socket head screw.”

The size of the Socket Head Screw 95119012 is 1/4-20 x 1, which means it has a 1/4 inch diameter and a 20 threads per inch pitch. The length of the screw is 1 inch (or 25.4 millimeters).

The Socket Head Screw 95119012 is commonly used in 90000 psi pump applications where a strong, secure fastening is needed.

The hexagonal socket drive in the head allows for easy installation and tightening with an Allen wrench or hex key.

The Socket Head Screw 95119012 often used in applications where there is limited space for tool access in 90000 psi pump, as the hexagonal socket drive allows for a more compact design than other types of fasteners.

They are also often used in applications where a flush-mounting of the screw head is desired, as the cylindrical head of the socket head screw can be countersunk into the surface it is being fastened to.

The Socket Head Screw 95119012 may be used in a variety of applications, depending on the specifications and requirements of the project.

90000 psi Waterjet Intensifier Pump:

Here are some general torque values for Socket Head Screws based on the size and material of the screw:

– Steel Socket Head Screws:

– 1/4 inch: 7-10 ft-lbs

– 5/16 inch: 15-20 ft-lbs

– 3/8 inch: 30-35 ft-lbs

– 1/2 inch: 60-65 ft-lbs

– Stainless Steel Socket Head Screws:

– 1/4 inch: 6-8 ft-lbs

– 5/16 inch: 12-15 ft-lbs

– 3/8 inch: 25-30 ft-lbs

– 1/2 inch: 50-55 ft-lbs

– Titanium Socket Head Screws:

– 1/4 inch: 4-5 ft-lbs

– 5/16 inch: 8-10 ft-lbs

– 3/8 inch: 18-20 ft-lbs

– 1/2 inch: 35-40 ft-lbs

It’s important to note that these torque values are only guidelines and may need to be adjusted based on the specific requirements of the application.

It’s also important to use a calibrated torque wrench to ensure accurate torque values and toperform a torque test if necessary to ensure that the Socket Head Screw is installed with the appropriate clamping force.

Additionally, our screw manufacturer provides torque charts specific to the products, which may include additional information such as recommended torque values for different grades or finishes of the same size of screw.

It’s always a good idea to consult our manufacturer’s recommendations when available.