Description
10074714 O-RING.2-7/16"x2-5/8"x3/32"Jet d’eau VITON 60000 psi
Pièces principales de la pompe SL-IV 50HP :
| Article | N° de produit | Nom du produit | Image |
| 1 | 05144647 | Cylindre HP |  |
| 2 | 05144688 | Ensemble de tête d’étanchéité |  |
| 3 | 05144696 | Entretoise de tête d’étanchéité |  |
| 4 | 05144712 | Chemise de cylindre |  |
| 5 | 05149703 | Assemblage du joint |  |
| 6 | 05130091 | Cartouche hydraulique |  |
| 7 | 05119151 | Piston en céramique |  |
| 8 | 05116561 | Clapet HP |  |
| 9 | 05116751 | Goupille à clapet |  |
| 10 | 05144670 | Dispositif de retenue à clapet |  |
Connaissances pour Machine de découpe au jet d’eau et Pièces de rechange Waterjet.
About Water Jet Cutting Machine Jet d’eau 60000 psi Custom Parts Measurement
For water jet cutting machine Jet d’eau 60000 psi customized parts, measurement is a very important aspect to ensure that the part meets the design requirements. Below are the general measurement methods and tools that can be used to measure customized parts for water jet cutting machines Jet d’eau 60000 psi :
Calipers: Calipers are one of the most common measuring tools used to measure linear dimensions such as length, width and height. Traditional calipers or digital calipers can be used, choosing the right type and accuracy level as needed.
Vernier Calipers: A vernier caliper is a highly accurate measuring tool that can be used to measure smaller linear dimensions. It usually has graduations of 0.01 millimeters or less and is suitable for measurements that require higher accuracy.
OD Gauge and ID Gauge: Used to measure the outer and inner diameters of cylindrical parts. OD Gauges measure the OD by means of two measuring feet, while ID Gauges measure the ID by means of two measuring jaws.
Height Gauge: Used to measure the height or thickness of a part. It usually has adjustable measuring feet and precise perpendicularity to ensure accurate height measurement.
Surface Roughness Gauge: The surface roughness of customized parts for water jet cutting machines Jet d’eau 60000 psi is an important parameter. A surface roughness meter can be used to measure the surface roughness of a part and provide the corresponding surface quality parameters such as Ra value.
And so on there are other measurement steps that I won’t list here.
Si vous êtes intéressé par des produits de jet d’eau de Win-Win Fournisseur de jet d’eau, Contactez-moi s’il vous plaît.
La vidéo ci-dessous montre notre nouvelle commande de deux pompes intensificatrices SL-VI (50HP) Jet d’eau 60000 psi En test, emballage à l’expédition :
