Description
49890825 SILENCER.SOLENOID VALVE.5.48.5 W 60000 psi waterjet
Pièces principales de la pompe SL-IV 50HP :
| Article | N° de produit | Nom du produit | Image |
| 1 | 05144647 | Cylindre HP |  |
| 2 | 05144688 | Ensemble de tête d’étanchéité |  |
| 3 | 05144696 | Entretoise de tête d’étanchéité |  |
| 4 | 05144712 | Chemise de cylindre |  |
| 5 | 05149703 | Assemblage du joint |  |
| 6 | 05130091 | Cartouche hydraulique |  |
| 7 | 05119151 | Piston en céramique |  |
| 8 | 05116561 | Clapet HP |  |
| 9 | 05116751 | Goupille à clapet |  |
| 10 | 05144670 | Dispositif de retenue à clapet |  |
Connaissances pour Machine de découpe au jet d’eau et Pièces de rechange Waterjet.
Distance between water jet cutting head and pump of Jet d’eau 60000 psi
The distance between the Jet d’eau 60000 psi water jet cutting head and the pump usually depends on the specific water jet cutting system and application requirements. In general, the distance between the water jet cutting head and the pump can be maintained in the range of a few meters to tens of meters. Here are some considerations and common distance configurations:
Water Pressure Loss: Water undergoes pressure loss during delivery, so in water jet cutting systems it is often necessary to place the cutting head Jet d’eau 60000 psi as close to the pump as possible to minimize pressure loss. A shorter distance can help keep the cutting head under higher water pressure to ensure cutting effectiveness and speed stability.
Pump and cutting head connection: The Jet d’eau 60000 psi pump in a water jet cutting system usually delivers a high pressure stream of water to the cutting head, so a connecting pipe is needed to connect the pump to the cutting head. The distance needs to be set taking into account the length and diameter of the connecting pipe to ensure adequate water flow supply and pressure stability.
Range of motion of the water jet cutting head: Depending on the specific cutting requirements, the water jet cutting head Jet d’eau 60000 psi may need to be moved and positioned on the workpiece. Therefore, when installing the cutting head, sufficient distance needs to be set aside to ensure that the cutting head can cover the required cutting area.
It should be noted that the distance setting needs to be evaluated and adjusted according to the specific water jet cutting system Jet d’eau 60000 psi and application requirements. It is recommended to refer to the guidance provided by the manufacturer of the water jet cutting machine or consult a specialized water jet cutting system Jet d’eau 60000 psi supplier for accurate distance configuration recommendations.
Si vous êtes intéressé par des produits de jet d’eau de Win-Win Fournisseur de jet d’eau, Contactez-moi s’il vous plaît.
La vidéo ci-dessous montre notre nouvelle commande de deux pompes intensificatrices SL-VI (50HP) Jet d’eau 60000 psi En test, emballage à l’expédition :
