Description
11328 Kit d’aiguille et de siège normalement fermé Boutique de jet d’eau
| IMAGE | SKU | NOM | ||
|---|---|---|---|---|
 | 80086622 | Hydraulic Cartridge Seal Assembly | ||
 | 5049689 | Hydraulic Oil Filter | ||
| 05049689 | Hydraulic Oil Filter | ||
 | 10107894 | Inlet Poppet Check Valve | ||
 | 500-15-0100 | INSR-CBD,.295 X 0.030 X 3.00″ (PG) | ||
 | 500-15-0102 | INSR-CBD,.295 X 0.040 X 3.00″ (PG) | ||
 | 501-1-0010 | Internal circlip | ||
 | EL-72 | LP Check Valve Housing | ||
 | SP-72-6 | LP Check Valve Housing | ||
 | SP-72-7 | LP Check Valve Housing | ||
 | SP-73-2 | LP Check Valve Poppet | ||
 | 500-12-0040 | LP Check Valve Spring | ||
 | WJ0C1016 | Mini Whipline | ||
 | 12747 | Mixing Chamber | ||
 | 11328 | Needle and Seat Normally Closed Kit | ||
 | 12862 | Nozzle Nut | ||
 | 20462745 | Nozzle Tube – PAC | ||
 | 10138410 | Nozzle Tube 0.38″ x 5.0″ | ||
 | 500-20-0011 | NOZZLE TUBE 119MM | ||
 | 13839 | Nozzle Tube Assy 230mm | ||
 | 13730 | Nozzle Tube Assy PAC 162mm | ||
 | 500-5-0042 | O-Ring BS-033 | ||
 | 500-19-0057 | Oil Filter 19 Micron | ||
 | 500-19-0053 | Oil Filter 24 Micron | ||
 | 500-19-0056 | Oil Filter 4 Micron |
Knowledge of waterjet cutting machine and spare parts of waterjet shop:
The waterjet shop Needle and Seat Normally Closed Kit for water jet cutting machines is an accessory used to repair the water switch of water jet cutting machines. The Needle and Seat Normally Closed Kit is an important part of the water jet cutting machine, used to control the flow and pressure of the water to ensure the normal operation of the water jet cutting machine.
The waterjet shop Needle and Seat Normally Closed Kit usually includes the seals, stem, seat and other accessories. When the on/off valve has problems such as water leakage and unstable water pressure, it can be repaired by replacing the Needle and Seat Normally Closed Kit. When replacing the Needle and Seat Normally Closed Kit, you first need to turn off the power to the water jet cutting machine and turn off the water source.
Then waterjet shop use the tools to disassemble the on/off valve, disassembly needs to be careful not to damage the original seals and springs and other accessories. Next, waterjet shop install the new Needle and Seat Normally Closed Kitonto the water switch, taking care to place the parts in the correct order and tighten the screws with the appropriate tools. After the installation is complete, the water switch needs to be tested to ensure its proper working and sealing performance.
Win-Win is a waterjet shop for waterjet cutting machine and waterjet parts, If you need any waterjet procucts, Contactez-moi s’il vous plaît
The following is Win-Win waterjet shop display.
