Descripción

05144357 CUERPO. CABEZA DE SELLO、PUERTO、SLIV Head Waterjet

Artículo	Producto NO.	Nombre del producto	Imagen
1	05144647	Cilindro HP
2	05144688	Conjunto de cabezal de sellado
3	05144696	Espaciador de cabezal de sellado
4	05144712	Camisa del cilindro
5	05149703	Conjunto de sellos
6	05130091	Cartucho hidráulico
7	05119151	Émbolo cerámico
8	05116561	Poppet HP
9	05116751	Pin de poppet
10	05144670	Retenedor de poppet

Conocimiento para Máquina de corte por chorro de agua y Piezas de repuesto de chorro de agua.

Water jet cutting machine x,y,z axis motor power from Win-Win head waterjet：

The power size of the x,y,z axis motor of a water jet cutting machine from Win-Win head waterjet is based on the model, specification, size, load, cutting speed and acceleration of the machine. Therefore, the power of the motors used in different brands and models of water jet cutting machines may vary. The following are some common reference values for the X, Y and Z axis motor power sizes of water jet cutting machines from Win-Win head waterjet:

X-axis motor: usually the power is in the range of 0.8 kW, and may be higher depending on the load and speed requirements of the machine.

Y-axis motors: typically 0.8 kW, but may be higher depending on the load and speed requirements of the machine.

Z-axis motors: Typically 0.4 kW, but may be higher depending on the load and speed requirements of the machine.

It should be noted that the above motor power is for reference only, and the specific power size should be determined according to the actual situation of the machine and cutting needs. Meanwhile, different brands and models of water jet cutting machines from Win-Win head waterjet may vary, and operators need to read the machine’s manual in detail before using the machine in order to understand the machine’s motor power and usage requirements.

Si está interesado en cualquier producto de chorro de agua de Win-Win Proveedor de chorro de agua, Contáctame por favor.

The below is our waterjet cutting machine: