Descripción
SP-69-9 Cylinder Liner Waterjet Spare Parts
| IMAGEN | SKU | NOMBRE | ||
|---|---|---|---|---|
 | 05109111 | Autoline Sapphire Orifice 0.011″ | ||
 | 20412569 | Autoline Sapphire Orifice 0.013″ | ||
 | 5109137 | Autoline Sapphire Orifice 0.014″ | ||
| 05109137 | Autoline Sapphire Orifice 0.014″ | ||
 | 10187250N | Backup ring | ||
 | 11111 | Blue Thread Goop, 2 OZ | ||
 | 10188233N | Brass Backup Ring | ||
| 10188233 | Brass Backup Ring | ||
 | 13612 | Button Head Screw | ||
 | 500-20-0158 | Clamp Nut | ||
 | DD-074 | Coil | ||
 | 12276 | Collet | ||
 | 500-20-0159 | Collet | ||
 | EL-49-2 | Cylinder Body | ||
 | SP-49-12 | Cylinder Body | ||
| SP-49-13 | Cylinder Body | ||
 | EL-69-2 | Cylinder Liner | ||
 | SP4-69-175 | Cylinder Liner | ||
 | SP-69-10 | Cylinder Liner | ||
| SP-69-9 | Cylinder Liner | ||
 | PTTC-009 | Datum Block | ||
 | 500-20-0056 | Diamond Orifice 0.010″ | ||
 | 500-20-0057 | Diamond Orifice 0.011″ | ||
 | 500-20-0058 | Diamond Orifice 0.012″ |
Knowledge of Waterjet Cutting Machine and Waterjet Spare Parts:
How to adjust the cutting speed of the water jet cutting machine?
The cutting speed of a water jet cutting machine is determined by the following points.
1. The running speed of the platform. The running speed of the cutting platform is usually 0-1000mm/min, which can be adjusted by itself.
2. High pressure pump pressure, Win-Win has different types of pumps from 0-420mpa and 0-600mpa, and this pressure range can be adjusted by yourself
3. There are two types of abrasive regulator, automatic adjustment and manual adjustment, for the amount of abrasive feeding, which can be adjusted according to different cutting materials and requirements.
4. The aperture of Orifice and Nozzle of Waterjet Spare Parts, the larger the aperture, the more water and sand will be produced, and the cutting speed will be faster.
5. The hardness and thickness of the cutting material, the greater the hardness and thickness, the cutting speed will naturally be lower for materials with less hardness and thinner.
How to adjust the pressure of water jet cutting machine?
There is a pressure regulating valve on the High pressure pump, which can be adjusted independently according to the cutting demand, but the pressure should refer to the supplier’s suggestion, such as the Win-Win 0-420mpa pump, the recommended normal working pressure is 320-360mpa, such as 0- For 600mpa pumps, it is recommended that the normal working pressure be maintained at 490-530mpa. Long-term overpressure work will have a negative impact on the life of the parts of the machine.
Win-Win is a waterjet cutting machine, Waterjet Spare Parts and waterjet parts supplier, If you want to know Waterjet Spare Parts waterjet pumps and waterjet cutting machine, Contáctame por favor
