Descripción

Waterjet spare parts: Rebuild kit

Item number: 72125203

DetalleS: utilizado en la máquina de corte por chorro de agua SL-VI 100HP

Relacionado Piezas de repuesto de chorro de agua:

FAQ of platform waterjet machine & waterjet spare parts etc.:

What’s the reason of water leaking of connection between high pressure cylinder head and hp cylinder?

If there is water leaking from the connection between the high-pressure cylinder head and the high-pressure cylinder in a waterjet system, there could be several potential reasons for this issue. Here are some possible causes:

Loose or damaged fittings: The connection between the high-pressure cylinder head and the high-pressure cylinder relies on fittings, such as threaded connectors or flanges. If these fittings are loose or damaged, they may not provide a proper seal, resulting in water leakage. Inspect the fittings for any signs of looseness, wear, or damage, and tighten or replace them as necessary.

Improper sealing: The connection between the high-pressure cylinder head and the high-pressure cylinder may require gaskets, O-rings, or seals to ensure a tight seal. If these sealing components are worn out, improperly installed, or damaged, water can leak through the connection. Check the condition of the seals and replace them if needed, ensuring proper installation.

Over-pressurization: Excessive pressure within the high-pressure cylinder can cause leakage at the connection point. This can occur due to factors such as a malfunctioning pressure relief valve, an incorrectly set pressure regulator, or a failure in the pressure control system. Verify that the pressure is within the recommended range and inspect the pressure relief valve and pressure control components for any issues.

Cracked or damaged components: If the high-pressure cylinder head or the high-pressure cylinder itself is cracked or damaged, it can lead to water leakage. Inspect these components for any visible signs of damage, such as cracks, fractures, or corrosion. If any damage is found, the affected parts may need to be repaired or replaced.

Improper assembly or installation: Incorrect assembly or installation of the high-pressure cylinder head and the high-pressure cylinder can result in leakage. Ensure that the components are properly aligned, tightened, and secured according to the manufacturer’s instructions.

Wear and tear: Over time, wear and tear can affect the integrity of the connection between the high-pressure cylinder head and the high-pressure cylinder. Components may become worn, leading to a weakened seal and potential leakage. Regular inspection and maintenance are essential to address any signs of wear and replace components as necessary.

If you encounter water leakage at the connection between the high-pressure cylinder head and the high-pressure cylinder, it is recommended to address the issue promptly. It’s advisable to consult the manufacturer’s documentation, seek guidance from their technical support, or contact a qualified service technician with expertise in waterjet systems to diagnose the problem accurately and perform the necessary repairs.

Necesita soporte técnico o piezas de chorro de agua, contáctenos en WhatsApp o déjenos un mensaje.