Descripción
500-15-0100 INSR-CBD,.295 X 0.030 X 3.00″ (PG), 500-15-0102 INSR-CBD,.295 X 0.040 X 3.00″ (PG) Waterjet Shop Waterjet Shop
IMAGEN | SKU | NOMBRE | ||
---|---|---|---|---|
80086622 | Conjunto de sello de cartucho hidráulico | |||
5049689 | Hydraulic Oil Filter | |||
05049689 | Hydraulic Oil Filter | |||
10107894 | Inlet Poppet Check Valve | |||
500-15-0100 | INSR-CBD,.295 X 0.030 X 3.00″ (PG) | |||
500-15-0102 | INSR-CBD,.295 X 0.040 X 3.00″ (PG) | |||
501-1-0010 | Internal circlip | |||
EL-72 | LP Check Valve Housing | |||
SP-72-6 | LP Check Valve Housing | |||
SP-72-7 | LP Check Valve Housing | |||
SP-73-2 | LP Check Valve Poppet | |||
500-12-0040 | LP Check Valve Spring | |||
WJ0C1016 | Mini Whipline | |||
12747 | Cámara de mezcla | |||
11328 | Needle and Seat Normally Closed Kit | |||
12862 | Nozzle Nut | |||
20462745 | Tubo de boquilla – PAC | |||
10138410 | Tubo de boquilla 0.38" x 5.0" | |||
500-20-0011 | TUBO DE BOQUILLA 119MM | |||
13839 | Conjunto de tubo de boquilla de 230 mm | |||
13730 | Conjunto de tubo de boquilla PAC 162 mm | |||
500-5-0042 | Junta tórica BS-033 | |||
500-19-0057 | Filtro de aceite 19 micras | |||
500-19-0053 | Filtro de aceite 24 micras | |||
500-19-0056 | Filtro de aceite 4 micras |
Knowledge of waterjet cutting machine and spare parts of waterjet shop:
What do I need to pay attention to when replacing the nozzles of my water jet cutting machine?
1, turn off the water jet cutting machine waterjet shop: to ensure the safety of the operator, we must turn off the machine before replacing the nozzle.
2, waterjet shop nozzle selection: we know that there are various sizes and types of nozzles, we must choose the right nozzle for our machine and cutting requirements.
3, clean up the work area: we need to keep the operating area clean and tidy before doing any repairs to the water jet cutting machine.
4, waterjet shop dismantle the old nozzle: dismantle the nozzle taking care not to damage other corresponding parts
5, install the new nozzle: follow the instructions or the manufacturer’s guidance on the correct steps to replace the nozzle
6, adjust the nozzle: adjust and fix the nozzle
7, start the water jet cutting machine: start the machine to test the nozzle working condition, whether everything is good and put into production.
8, the old parts also need to be saved, and record management, so as to know the life of the parts.
Win-Win is a waterjet shop for waterjet cutting machine and waterjet parts, If you need any waterjet procucts, Contáctame por favor
The following is Win-Win waterjet shop display.