Descripción
500-20-0110 HP Outlet Poppet Kit – Seat, Poppet & Spring Waterjet Replacement Parts
The 500-20-0110 HP Outlet Poppet Kit includes:
500-20-0112 HP Spring
500-20-0111 HP Check Valve Seat
500-20-0113 HP Outlet Poppet
| IMAGEN | SKU | NOMBRE | ||
|---|---|---|---|---|
 | 500-20-0059 | Orificio de diamante 0.013" | ||
 | 500-20-0060 | Orificio de diamante 0.014" | ||
 | 5116561 | Válvula de retención de asiento de descarga | ||
| 05116561 | Válvula de retención de asiento de descarga | ||
 | 12401 | Elemento filtrante | ||
 | 10126969 | Tubo de enfoque 0.030" | ||
 | 500-15-0060 | Tubo de enfoque 0.030" (3") Corte recto | ||
 | 10126928 | Tubo de enfoque 0.040" | ||
 | 500-15-0070 | Tubo de enfoque 0.040" (3") Corte recto | ||
 | 500-15-0020 | Tubo de enfoque 0.040" (PAC – 2.5") | ||
 | 11679-012 | Junta tórica de tubo de granate | ||
 | 500-3-0061 | Grasa, 0.75 OZ | ||
 | SP1115 | Montaje de arbustos guía | ||
 | SP1092 | Conjunto de casquillo guía 55K | ||
 | SP1107 | Conjunto de casquillo guía 66K | ||
 | SP1120 | Conjunto de casquillo guía 66K | ||
 | 10079580 | Adaptador HP (solo para cuerpo de válvula cuadrado) | ||
 | 500-20-0111 | Asiento de válvula de retención HP | ||
 | 11288 | Inserto cónico HP | ||
 | 500-20-0113 | Obturador de salida HP | ||
 | 500-20-0110 | HP Outlet Poppet Kit – Seat, Poppet & Spring | ||
 | SP1052 | Conjunto de sello HP 66K | ||
 | SP1055 | Conjunto de sello HP 66K | ||
 | SP1060 | Conjunto de sello HP 66K | ||
 | 500-20-0112 | Resorte HP |
Conocimiento de la máquina de corte por chorro de agua y las piezas de chorro de agua Piezas de repuesto por chorro de agua:
There are many Waterjet Replacement Parts seals in the water jet cutting machine, and these Waterjet Replacement Parts seals are also very important. If the seals are aging, worn, loose or cracked, it will affect the operation and cutting efficiency of the water jet cutting machine.
Here are some common problems and solutions for waterjet cutting machine seals:
1. Leakage caused by aging or wear of seals: The Waterjet Replacement Parts seals in water jet cutting machines are divided into three categories, oil seals, water seals, and air source seals. Once the machine leaks, we must first consider It is whether there are seals in these positions, whether it is due to the aging or wear of the seals, we need to disassemble them for identification, and then carry out maintenance. Usually rubber seals cannot be repaired and need to be replaced. But if it is a hard seal, that is, a metal seal, you can check the situation to see if it can be repaired or replaced.
2. The water pressure is too high or too low: the pressure of the water jet cutting machine has a specified value. If it exceeds the limit value, it is very easy to cause the damage and failure of each seal. Therefore, be sure to adjust and use the machine within the specified range.
3. Improper installation: We know that many seals of water jet cutting machines are composed of two, three, or even four or five sets, and the installation order of these seals is very important. Once the installation is wrong, it will Lead to failure or damage, or even affect the use of other components, so it is necessary to learn and follow the normal operation tutorial to install and replace.
4. Improper cleaning of the machine: If the parts, the relevant installation positions and the hands of the operator are not thoroughly cleaned when installing and replacing the seals, impurities may be mixed into the parts and equipment, resulting in damage to the machine or parts.
In summary, we need to pay attention to the above details.
Win-Win es un fabricante de piezas de repuesto para chorro de agua y piezas de chorro de agua de la máquina de corte por chorro de agua, si quieres saber algo, Contáctame por favor
A continuación se muestran nuestros productos y piezas de repuesto para chorro de agua.
Win-Win provice Waterjet Replacement Parts nozzle, Waterjet Replacement Parts orifice, Waterjet Replacement Parts cutting head parts, Waterjet Replacement Parts pump parts and other Waterjet Replacement Parts.
