Descripción
Waterjet parts: Liner
Item number: 72110945
DetalleS: utilizado en la máquina de corte por chorro de agua SL-VI 100HP
Piezas de chorro de agua relacionadas:
| Número de artículo | Descripción |
| 20429831 | waterjet parts High pressure piping assembly |
| 20431316 | waterjet parts Redundant kit |
| 49830938 | waterjet part Electrical assembly |
| 20461179 | waterjet parts Decal package, 100Hp single |
| 05128087 | Etiqueta de inicio de la parte del chorro de agua |
Preguntas frecuentes sobre la máquina de chorro de agua de plataforma, etc.:
Who invented the waterjet?
The amount of water used by a waterjet cutting system depends on several factors, such as the size and type of nozzle, the pressure of the water, and the material being cut. Generally, a waterjet cutting system can use anywhere from 0.5 to 5 gallons (1.9 to 18.9 liters) of water per minute, although some systems may use more or less than this range.For example, a small waterjet cutting machine with a 0.010-inch (0.25 mm) nozzle and a pressure of 60,000 psi (4,137 bar) may use around 0.5 gallons (1.9 liters) of water per minute. A larger machine with a 0.040-inch (1.02 mm) nozzle and a pressure of 90,000 psi (6,205 bar) may use around 5 gallons (18.9 liters) of water per minute.It’s important to note that the water used by a waterjet cutting system can be recycled and reused, which can help to reduce water consumption and waste. Additionally, some waterjet cutting systems use closed-loop water systems, which can further reduce water usage and minimize environmental impact.
Necesita soporte técnico o piezas de chorro de agua, contáctenos en WhatsApp o déjenos un mensaje.
