A waterjet is a high-precision cutting device commonly used for cutting materials in manufacturing. However, long-term use can cause various failures of the waterjet cutting parts. Therefore, it is very important for users to understand the common faults of waterjet cutting parts and their solutions. Here are 25 common waterjet cutting parts failures and their solutions:

1. Internal circuit failure: may cause the machine not to work properly. Solution: Replace the damaged circuit board or re-solder the circuit.
2. Machine overheating: caused by high temperature or prolonged use. Solution: Let the machine cool down or install a radiator.
3. Power short circuit: may cause the machine not to work normally. Solution: Repair or replace the damaged power cord.
4. Machine shaking or moving: due to loose or unstable foundations or other machine parts. Solution: Strengthen various movable parts or re-level the foundation.
5. Uneven water flow: caused by a damaged pump or hose. Solution: Replace damaged pump or hose.
6. Blade offset: misaligned edges. Solution: Readjust the knife holder and fix the clamping plate.
7. No water flow: due to a lack of water supply or a clogged pipe. Solution: Check the water source and pipes and clean the blocked parts.
8. Excessive friction: can cause debris to clog. Solution: Empty the debris and readjust.
9. Tilt/Unbalance: may result in poor cutting results. Solution: Re-level the machine.
10. Cut marks: caused by worn nozzle heads. Solution: Replace the nozzle head with a new one.
11. Dirty: failure to clean may allow debris to enter the machine and cause damage. Solution: Keep the machine clean.
12. Cutting material is too thick/hard: may result in poor cutting results. Solution: Reduce the cutting speed or replace with a more suitable cutting tool.
13. Machine stops working: may be due to insufficient power supply and other reasons. Solution: Check the power supply and replace the power cord

To sum up, the above are 12 possible faults that waterjet cutting parts may encounter and their corresponding solutions. Of course, a better approach is to follow the waterjet cutting parts precautions, such as regularly inspecting and maintaining the waterjet cutting parts, to avoid these failures. When using the waterjet cutting parts, you must strictly follow the instructions in the instruction manual and solve the problem in time when there is a problem.